|
|
|
|
|
|
|
|
|
|
|
Lan
aus Lünen
offline
OC God
20 Jahre dabei !
AMD Athlon 64 X2 Dual Core
2100 MHz @ 3100 MHz
38°C mit 1.45 Volt
|
      
Also am Board lag es definitiv nicht. Hab jetzt mit nem anderen BIOS asynchron einen FSB von 260 Mhz geschafft....primestable 
Trotzdem geht das Ganze kein Mhz höher. Liegt also am RAM. Ich hab vorhin mal die Passivkühler runtergenommen um zu gucken was genau ich da für Module hab. Und Folgendes ist dabei ruasgekommen :
Auf dem Chip
TwinMOS
03204
TMD7608F8E500
Auf dem Etikett
p/n m2g9j16ajatt9f081aa4t
323m53051750449
Ich hab dann mal n bissel gesurf um zu gucken was man mitmehr Spannung wohl aus denenrausholen kann und bin dabei auf den folgenden englischen Text gestoßen :
The Speed Premiums tested have had a change in the ICs and now use Winbond UTT (UnTesTed) chips which are showing up all over the place. You can tell them appart from the sticks using the prior ICs not only by doing a visual, the new ones look like the bh-5/bh-6 of old, but also by the parts number on the stickers attached to the modules.
The ones tested in this review end in the coding AADT, the new ones use the coding ending in AA4T, (notice the D vs the 4). This code change is also printed on the ICs themselves, where the mfg. date is printed on the ICs, the old ones have the date (YYWW) plus the letter D, the new ones follow the Year/Week info with the number 4. An example of the old would be 0443D, like the modules used in this review and the new ones will look something like this...04514.
These new ICs, while showing no significant differences at default voltage, will scale through the roof when shot with extra voltage and perform very similar to the new line of extreme voltage memory from OCZ. In fact, there is much speculation that these same chips are used my OCZ to make their eXtreme Voltage series ram.
These sticks, with the new modules are hitting outrageous speeds of 255-275 at 2-2-2-x timings on both Intel and A64 systems. The only drawback is that you have got to be able to provide them with voltage in the 3.2v-3.6v range in order to get them to perform like this.
If you think these are not good overclockers....think again!
Wenn ich das richtig verstehe und mich nicht irre...dann sind meine Module gar nicht mal so schlecht, oder ?
Biostar TForce 550, AMD Radeon HD 4670, 2 * 2 GB GSkill DDR2 1000, BeQuiet! P5 470 W
|
Beiträge gesamt: 2026 | Durchschnitt: 0 Postings pro Tag
Registrierung: Mai 2004 | Dabei seit: 7535 Tagen | Erstellt: 22:04 am 20. Feb. 2005
|
|
|
|
|
|
|
|
|
|
