|
|
|
|
|
|
|
|
|
BlueIce
offline
OC Newbie
21 Jahre dabei !
|
      
@wasi, hier die Abit-Settings:
vCore - CPU default (1.525v) to 1.90v in 0.025V increments
vDimm - 2.5 to 2.8 in 0.05v increments
vAGP - 1.5 to 1.65 in 0.05v increments
FSB- 100 to 300 in 1MHz increments
AGP CI - Auto, 6 Ratios, and FIXED 66:33
CPU Strap - 800, 667, 533, 400
CAS - 2, 2.5, 3
Memory Ratios -depends on FSB setting. At 190 my options were 5:4, 1:1, 3:2, and 'by SPD'
The Intel SATA RAID can be configured as secondary drives, boot drives, boot raid, and in many combinations that appear to
support SATA devices other than drives. However, it appears that configuring as a SATA device may removes an IDE channel -
so this needs to be tested further.
Initial Benchmarks
My 2.4 SL6RZ would not reach 200 - YET. I was able to boot at 194 and use ABO's set FSB for AOpen/Asus and get to 200 -
but it was not stable and did not activate the additional options at 200 - like PAT. Please keep this in mind as you vire
these benchmarks - since PAT lowers latency significantly and greatly improves memory bandwidth. For complete stability I
ran the 2.4 at 190FSB (3.42GHz), 1.65V.
You Corsair owners will be happy to know at least Abit has Corsair LL working properly. It boots at 190FSB at SPD which
Abit apparently downtimes slightly to 2.5,6,2,2. More important, however, is CorsairLL runs perfectly at DDR380 at 2,5,2,2
- the most aggressive amnual timings I could set. OCZ 3500EL works fine at 2,6,2,2 at this same DDR380 - but it actually
runs slower on the Abit - instead of the faster it has run in tests on other dual-channel boards.
(Geändert von BlueIce um 22:47 am April 27, 2003)
|
Beiträge gesamt: 8 | Durchschnitt: 0 Postings pro Tag
Registrierung: April 2003 | Dabei seit: 7889 Tagen | Erstellt: 22:46 am 27. April 2003
|
|
|
|
|
|
|
|
|
|
|
|
|
|
! 
