is this where the topic goes? if so please help w/ pin wire

» Welcome to English «

New topic Answer

dankis
offline

OC Newbie
21 Jahre dabei !

hi ! thanks so much for coming to my aid...

when i'm doing the pin/wire mod with the socket view, i understand u make a ' U ' with the wire when there are 2 holes in a row, but when there is three holes in a row or when there is like a pyramid shape with three in a row and one on top... then how do you do it? do you make like a ' W ' with the wires ? or just make many ' U ' wires and have alot of ' U ' tails into the middle hole ?

i hope my english is not too confusing , thank you so much so so so much for the help ^_^

- Danny

Beiträge gesamt: 5 | Durchschnitt: 0 Postings pro Tag
Registrierung: Juni 2003 | Dabei seit: 7830 Tagen | Erstellt: 21:47 am 15. Juni 2003

Svenauskr aus Krefeld offline Real OC or Post God ! 23 Jahre dabei ! AMD T-Bred 1466 MHz @ 2200 MHz 43°C mit 1.65 Volt	For three holes in a row just take two U's. Normally you can't break anything so just try. Listen, here's the thing. If you can't spot the sucker in the first half hour at the table, then you ARE the sucker.
	Beiträge gesamt: 17202 \| Durchschnitt: 2 Postings pro Tag Registrierung: Mai 2001 \| Dabei seit: 8585 Tagen \| Erstellt: 0:24 am 16. Juni 2003

dankis offline OC Newbie 21 Jahre dabei !	is it ok if the two tails going into the middle hole are not touching each other? also, here is where im wondering, does the pin need to be touching the wire inside the socket or no?
	Beiträge gesamt: 5 \| Durchschnitt: 0 Postings pro Tag Registrierung: Juni 2003 \| Dabei seit: 7830 Tagen \| Erstellt: 4:09 am 16. Juni 2003

Svenauskr aus Krefeld offline Real OC or Post God ! 23 Jahre dabei ! AMD T-Bred 1466 MHz @ 2200 MHz 43°C mit 1.65 Volt	What would happen if you were connecting the pins of the cpu instead of sticking some cables into the holes of the socket?? Listen, here's the thing. If you can't spot the sucker in the first half hour at the table, then you ARE the sucker.
	Beiträge gesamt: 17202 \| Durchschnitt: 2 Postings pro Tag Registrierung: Mai 2001 \| Dabei seit: 8585 Tagen \| Erstellt: 20:02 am 16. Juni 2003

dankis
offline

OC Newbie
21 Jahre dabei !

you could use one long wire and wrap it around the 3 pins in a row or the pyramid?

so i take it its ok if the wires are not physically touching each other for a 3 in a row or pyramid?
and its ok if the cpu pin is not in direct physical contact with the wire in the socket?
so really, you could just cut a bunch of small pieces of wire and put 1 small piece in each socket and it works ok?
its confusing with the tool because it shows them connected in a line :o

Beiträge gesamt: 5 | Durchschnitt: 0 Postings pro Tag
Registrierung: Juni 2003 | Dabei seit: 7830 Tagen | Erstellt: 21:17 am 18. Juni 2003

baadroker aus bolsward (frl) offline Member 21 Jahre dabei ! AMD Athlon XP 1667 MHz @ 1810 MHz 55°C mit 1.84 Volt	why don't you stop doing stupid and get some 1 second glue a sharp pencil and a sharp object, look in the workshop painting xp guide look what bridges to connect and wich to cut put gleu in the bridges cut by amd and the ones cut by you use the pecil to connect the bridges don't worry if you fail (i did too) just make sure you haven got any gleu left on the contacts
	Beiträge gesamt: 2 \| Durchschnitt: 0 Postings pro Tag Registrierung: Juli 2003 \| Dabei seit: 7802 Tagen \| Erstellt: 20:50 am 16. Juli 2003

New topic Answer