At last I've let it primeStable at 266 mhz bus, and memory at 221 Mhz cas 2-2-2 with voltage 2,85v, multiplier 9,5 (2526 mhz at 1,55v effective)
The problem is that the computer is completely stable, works perfectly, but... One time boot perfectly, then shut down, turn on again, and doesn't post, press power button 3 secs and power off, and by third, press button and post, but at only 200 bus mhz (a kind of secure mode I suppose). By last, shut down and put on again, then booting perfectly at 266 bus, but when shut down, next time again doesn't post, and the sequence repeat:
-Boot OK (266 bus) -No post -post, but at 200 bus -Boot OK (266 bus) -No post ... ...
Anyone knows why is this happening? I'm desesperate :'(
Beiträge gesamt: 28 | Durchschnitt: 0 Postings pro Tag Registrierung: Okt. 2002 | Dabei seit: 8080 Tagen | Erstellt: 2:25 am 30. Jan. 2005
Hi, I suppose the Problem could be the following but I don't know your HW that good so it's only a suggestion.
When turning on your PC the Powersupply starts up and it takes a while until all Volltages and currents are up & stable. The PSU indicates that state with a +5V Signal within approx. 0.5 seconds. I don't know at which point your BIOS inits the onboard timer. So I suggest, that the BIOSs Time-Out for this signal is already due by the Time the PSU sets it.
Beiträge gesamt: 159 | Durchschnitt: 0 Postings pro Tag Registrierung: Feb. 2005 | Dabei seit: 7223 Tagen | Erstellt: 4:33 am 13. Feb. 2005
Copyright 1999 - 2024 by www.ocinside.de - All rights reserved.
Unser PC Forum verwendet Cookies für einen optimalen Service. Durch die Nutzung dieser Webseite erklären Sie sich damit einverstanden, dass wir personenbezogene Daten wie z.B. die IP-Adresse speichern und wir zusammen mit Drittanbietern Cookies verwenden, um personalisierte Anzeigen zur interessengerechten Werbung und weitere externe Inhalte anzuzeigen. Einverstanden? Ja / Nein ImpressumDatenschutzEinstellungen