2200+ Thorton Voltage mod

» Welcome to English «

Stalix offline OC Newbie 19 Jahre dabei ! AMD Thorton	I have a MSI K7T266 Pro2-A motherboard which only has a max voltage of 1.7 which totally sucks. I want to overclock to 2.2GHz(163FSB) but I need more voltage that 1.7. I can get into windows with 2.1GHz(162FSB). What voltage do you pros recomend for my 2200+??? I would really apreciate what you guys think and caould you explaine the easiest mod to do.
	Beiträge gesamt: 3 \| Durchschnitt: 0 Postings pro Tag Registrierung: Jan. 2005 \| Dabei seit: 7261 Tagen \| Erstellt: 4:23 am 5. Jan. 2005

ocinside
aus Krefeld
offline

Administrator
23 Jahre dabei !

Intel Core i9
3600 MHz @ 5200 MHz
78°C mit 1.552 Volt

Welcome in our forum

If your CPU temperature isn't very high I don't see any problems increasing the Vcore up to 1.85 Volt or more.
But increase it in little steps to see how high your Vcore have to be to get a stable processor, because higher voltages will give you also higher temperatures.
BTW. the Pin-mod should work fine with your processor

Hardware News lesen * Talk * Smarthome und Gadgets
Overclock, Modding und Testberichte * Fanartikel kaufen

Beiträge gesamt: 170907 | Durchschnitt: 20 Postings pro Tag
Registrierung: April 2001 | Dabei seit: 8606 Tagen | Erstellt: 18:25 am 5. Jan. 2005

Stalix
offline

OC Newbie
19 Jahre dabei !

AMD Thorton

My current temp at a stable 2.17GHz(160FSB) is ~38C idle and ~42C Load.

Is that ok teamp at 1.7 volts?

And what pin-mod layout do I use, barton?... because you dont have a layout for thorton core?

And what volatge do you think I should try first???
Cuz I'm thinking of trying 1.8 volts first but I dont know maybe a bit more?

And I was thinking of doing a mobile mod to it to make it into a mobile.
What are the benfeits of making it a mobile besides changing the multiplier in windows, will I get better temps from a mobile?

(Geändert von Stalix um 21:30 am Jan. 5, 2005)

Beiträge gesamt: 3 | Durchschnitt: 0 Postings pro Tag
Registrierung: Jan. 2005 | Dabei seit: 7261 Tagen | Erstellt: 21:25 am 5. Jan. 2005

Stalix offline OC Newbie 19 Jahre dabei ! AMD Thorton	Holy moly!!!!!!!!!!!!! I did the Barton 1.8 volt pin-mod and it worked great but when I went into bios I noticed that now I have the option to make my cpu voltage 1.75, 1.8, 1.825, and 1.85. Just by doint the one 1.8 mod. WOW!!!!!!!! I'm so freaking happy. hmm wonder if I do the 1.85 mod will 1.9 volts apear??? lol (Geändert von Stalix um 2:21 am Jan. 6, 2005)
	Beiträge gesamt: 3 \| Durchschnitt: 0 Postings pro Tag Registrierung: Jan. 2005 \| Dabei seit: 7261 Tagen \| Erstellt: 1:57 am 6. Jan. 2005

faulpelz
aus Solingen
offline

OC God
21 Jahre dabei !

AMD Ryzen 7
3900 MHz @ 4400 MHz
62°C mit 1.35 Volt

i would try it when the temperature is OK but with the KT266A chipset you are on the limit with fsb and the pci and agp clock. better you buy another board because the agp and pci clock is too high for your hard drives and your graphics card.
failures maybe not come from cpu or RAM when you set agp and pci clocks so high!

Die Weisheit des faulpelz:
Und wenn's dich auch etwas mehr kostet: Solange es dir ein bisschen Arbeit erspart, war es das Geld wert!!!

Beiträge gesamt: 3783 | Durchschnitt: 0 Postings pro Tag
Registrierung: Okt. 2003 | Dabei seit: 7722 Tagen | Erstellt: 21:45 am 25. März 2005

Beomaster aus Dresden offline Real OC or Post God ! 22 Jahre dabei ! AMD Phenom II 3200 MHz @ 3675 MHz 59°C mit 1.400 Volt	don't be so frightened, it is correct that the AGP and PCI Bus will be raised together with the FSB, an at FSB 160 there are just 40MHz PCI and 80MHz AGP could be to high for some Cards, or Hard Disk Controller but if it works? I raised the FSB on my KT266 to 177 an all still work fine [SiLa] BF2 BattleClan Orgelgott
	Beiträge gesamt: 19351 \| Durchschnitt: 2 Postings pro Tag Registrierung: Feb. 2002 \| Dabei seit: 8309 Tagen \| Erstellt: 7:44 am 29. März 2005

New topic Answer