pinmod for tbird....possible?

» Welcome to English «

New topic Answer

buuha
offline

OC Newbie
20 Jahre dabei !

AMD Barton

i have a 800MHz tbird and chaintech 7AIA0. i would like to change the multi, but it doesn't work for me. i connected the pins that i looked up from workshop page, but the ratio is either the same (L1 bridges unconnected) or when L1 bridges are connected, then my PC simply dont post.

wheres the flaw, is there anything else i should do.....

i tried to get the CPU limits on 8rda+ and i could go up to 1200MHz with this processor, so the cpu is not the bottleneck.

the problem is that the multis dont change with pinmod, any advice is welcome

tnx

Beiträge gesamt: 2 | Durchschnitt: 0 Postings pro Tag
Registrierung: Juni 2004 | Dabei seit: 7465 Tagen | Erstellt: 21:19 am 14. Juni 2004

Henro aus Berlin offline Real OC or Post God ! 23 Jahre dabei ! Intel Core i9 3300 MHz @ 4600 MHz mit 1.3 Volt	try this ... the Pinmod is not for TBirds !
	Beiträge gesamt: 15120 \| Durchschnitt: 2 Postings pro Tag Registrierung: Juli 2001 \| Dabei seit: 8543 Tagen \| Erstellt: 9:45 am 25. Juni 2004

buuha offline OC Newbie 20 Jahre dabei ! AMD Barton	well tnx, but i'll think i'll pass that mod i guess i'll better find a better mobo than cut bridges lil less effort tnx for helping anyway, i raised the vcore up to 1.85 with such scheme
	Beiträge gesamt: 2 \| Durchschnitt: 0 Postings pro Tag Registrierung: Juni 2004 \| Dabei seit: 7465 Tagen \| Erstellt: 19:47 am 26. Juni 2004

New topic Answer