USB IR-Receiver v1.1 lirc -8

» Welcome to English «

snoopy82 offline OC Newbie 14 Jahre dabei ! AMD Phenom II	I want to use this IR receiver with ubuntu9.10 and lirc . please explain me the procedure to install this product with lirc . is it necessary to modify the folder hardware.conf and lirc.conf? First time i 'd like to know if there is a method to verify that the ir receiver is recognize by my linux system ? thanks cedric
	Beiträge gesamt: 5 \| Durchschnitt: 0 Postings pro Tag Registrierung: Jan. 2010 \| Dabei seit: 5427 Tagen \| Erstellt: 15:34 am 16. Jan. 2010

ocinside
aus Krefeld
offline

Administrator
23 Jahre dabei !

Intel Core i9
3600 MHz @ 5200 MHz
78°C mit 1.552 Volt

Do you already see the igorplug device in your ubuntu?
To check it, type the following in your shell:
dmesg | grep -i usb
or
dmesg | grep lirc

Then check, if you already receive remote signals ... type:
irw
then press a few buttons on your remote (set your universal remote to a RC5 device like e.g. a Philips TV)
If you see buttons, you can download a remote control file or configure the remote buttons manually.
If not, then you didn't have selected the proper device in your LIRC - select the Igorplug.

Hardware News lesen * Talk * Smarthome und Gadgets
Overclock, Modding und Testberichte * Fanartikel kaufen

Beiträge gesamt: 170924 | Durchschnitt: 20 Postings pro Tag
Registrierung: April 2001 | Dabei seit: 8610 Tagen | Erstellt: 16:50 am 16. Jan. 2010

snoopy82
offline

OC Newbie
14 Jahre dabei !

AMD Phenom II

i obtain this answer , there is a problem ?

root@vdrbox-desktop:~# dmesg | grep -i usb
[ 0.864684] usbcore: registered new interface driver usbfs
[ 0.864684] usbcore: registered new interface driver hub
[ 0.864684] usbcore: registered new device driver usb
[ 1.278626] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 1.278694] ehci_hcd 0000:00:12.2: new USB bus registered, assigned bus number 1
[ 1.290021] ehci_hcd 0000:00:12.2: USB 2.0 started, EHCI 1.00
[ 1.290072] usb usb1: configuration #1 chosen from 1 choice
[ 1.290088] hub 1-0:1.0: USB hub found
[ 1.290205] ehci_hcd 0000:00:13.2: new USB bus registered, assigned bus number 2
[ 1.310021] ehci_hcd 0000:00:13.2: USB 2.0 started, EHCI 1.00
[ 1.310063] usb usb2: configuration #1 chosen from 1 choice
[ 1.310079] hub 2-0:1.0: USB hub found
[ 1.310130] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 1.310194] ohci_hcd 0000:00:12.0: new USB bus registered, assigned bus number 3
[ 1.374076] usb usb3: configuration #1 chosen from 1 choice
[ 1.374091] hub 3-0:1.0: USB hub found
[ 1.374189] ohci_hcd 0000:00:12.1: new USB bus registered, assigned bus number 4
[ 1.434080] usb usb4: configuration #1 chosen from 1 choice
[ 1.434097] hub 4-0:1.0: USB hub found
[ 1.434202] ohci_hcd 0000:00:13.0: new USB bus registered, assigned bus number 5
[ 1.494084] usb usb5: configuration #1 chosen from 1 choice
[ 1.494099] hub 5-0:1.0: USB hub found
[ 1.494196] ohci_hcd 0000:00:13.1: new USB bus registered, assigned bus number 6
[ 1.554077] usb usb6: configuration #1 chosen from 1 choice
[ 1.554091] hub 6-0:1.0: USB hub found
[ 1.554190] ohci_hcd 0000:00:14.5: new USB bus registered, assigned bus number 7
[ 1.610853] usb 1-5: new high speed USB device using ehci_hcd and address 2
[ 1.614075] usb usb7: configuration #1 chosen from 1 choice
[ 1.614090] hub 7-0:1.0: USB hub found
[ 1.614136] uhci_hcd: USB Universal Host Controller Interface driver
[ 1.761373] usb 1-5: configuration #1 chosen from 1 choice
[ 2.227481] Initializing USB Mass Storage driver...
[ 2.227519] usbcore: registered new interface driver usb-storage
[ 2.227521] USB Mass Storage support registered.
[ 2.228578] input: Maxtor OneTouch as /devices/pci0000:00/0000:00:12.2/usb1/1-5/input/input3
[ 2.228624] scsi8 : SCSI emulation for USB Mass Storage devices
[ 2.228673] usbcore: registered new interface driver ums-onetouch
[ 2.228730] usb-storage: device found at 2
[ 2.228731] usb-storage: waiting for device to settle before scanning
[ 2.247518] usb 4-3: new low speed USB device using ohci_hcd and address 2
[ 2.436180] usb 4-3: configuration #1 chosen from 1 choice
[ 2.441041] usbcore: registered new interface driver hiddev
[ 2.446248] input: Logitech USB-PS/2 Optical Mouse as /devices/pci0000:00/0000:00:12.1/usb4/4-3/4-3:1.0/input/input4
[ 2.446287] generic-usb 0003:046D:C03E.0001: input,hidraw0: USB HID v1.10 Mouse [Logitech USB-PS/2 Optical Mouse] on usb-0000:00:12.1-3/input0
[ 2.446295] usbcore: registered new interface driver usbhid
[ 2.446297] usbhid: v2.6:USB HID core driver
[ 2.740019] usb 5-1: new low speed USB device using ohci_hcd and address 2
[ 2.938216] usb 5-1: configuration #1 chosen from 1 choice
[ 2.945308] input: LITEON Technology USB Multimedia Keyboard as /devices/pci0000:00/0000:00:13.0/usb5/5-1/5-1:1.0/input/input5
[ 2.945340] generic-usb 0003:046D:C313.0002: input,hidraw1: USB HID v1.10 Keyboard [LITEON Technology USB Multimedia Keyboard] on usb-0000:00:13.0-1/input0
[ 2.952207] input: LITEON Technology USB Multimedia Keyboard as /devices/pci0000:00/0000:00:13.0/usb5/5-1/5-1:1.1/input/input6
[ 2.952238] generic-usb 0003:046D:C313.0003: input,hidraw2: USB HID v1.10 Device [LITEON Technology USB Multimedia Keyboard] on usb-0000:00:13.0-1/input1
[ 3.252518] usb 6-3: new low speed USB device using ohci_hcd and address 2
[ 3.470242] usb 6-3: configuration #1 chosen from 1 choice
[ 7.230199] usb-storage: device scan complete
[ 8.141073] lirc_igorplugusb: USB remote driver for LIRC v0.2
[ 8.141075] lirc_igorplugusb: Jan M. Hochstein
[ 8.167549] lirc_igorplugusb[2]: Ing. Igor Cesko, Copyright(c) 2003 IgorPlug-USB AVR Tiny45 by www.ocinside.de on usb6:2
[ 8.171560] usbcore: registered new interface driver lirc_igorplugusb
root@vdrbox-desktop:~# dmesg | grep lirc
[ 7.586649] lirc_dev: IR Remote Control driver registered, major 61
[ 8.141073] lirc_igorplugusb: USB remote driver for LIRC v0.2
[ 8.141075] lirc_igorplugusb: Jan M. Hochstein
[ 8.141091] lirc_dev: lirc_register_driver: sample_rate: 100
[ 8.167549] lirc_igorplugusb[2]: Ing. Igor Cesko, Copyright(c) 2003 IgorPlug-USB AVR Tiny45 by www.ocinside.de on usb6:2
[ 8.171560] usbcore: registered new interface driver lirc_igorplugusb

Beiträge gesamt: 5 | Durchschnitt: 0 Postings pro Tag
Registrierung: Jan. 2010 | Dabei seit: 5427 Tagen | Erstellt: 18:48 am 16. Jan. 2010

ocinside aus Krefeld offline Administrator 23 Jahre dabei ! Intel Core i9 3600 MHz @ 5200 MHz 78°C mit 1.552 Volt	Nice, this is working. What does irw output with your remote control buttons? Hardware News lesen * Talk * Smarthome und Gadgets Overclock, Modding und Testberichte * Fanartikel kaufen
	Beiträge gesamt: 170924 \| Durchschnitt: 20 Postings pro Tag Registrierung: April 2001 \| Dabei seit: 8610 Tagen \| Erstellt: 19:02 am 16. Jan. 2010

snoopy82 offline OC Newbie 14 Jahre dabei ! AMD Phenom II	I try to check if i receive a signal from the remote with irw but there isn't any answer , thanks for your help, cedric
	Beiträge gesamt: 5 \| Durchschnitt: 0 Postings pro Tag Registrierung: Jan. 2010 \| Dabei seit: 5427 Tagen \| Erstellt: 19:25 am 16. Jan. 2010

ocinside aus Krefeld offline Administrator 23 Jahre dabei ! Intel Core i9 3600 MHz @ 5200 MHz 78°C mit 1.552 Volt	Just try a few Philips TV remote codes from your universal remote control to get a RC5 sequence. Hardware News lesen * Talk * Smarthome und Gadgets Overclock, Modding und Testberichte * Fanartikel kaufen
	Beiträge gesamt: 170924 \| Durchschnitt: 20 Postings pro Tag Registrierung: April 2001 \| Dabei seit: 8610 Tagen \| Erstellt: 20:03 am 16. Jan. 2010

snoopy82 offline OC Newbie 14 Jahre dabei ! AMD Phenom II	good evening , i try with my universal phillips remote (refsru5010) , she 's ok with my phillips tv but i can't comunicate with ir receiver. may be i forget to configurate something? best regards ced
	Beiträge gesamt: 5 \| Durchschnitt: 0 Postings pro Tag Registrierung: Jan. 2010 \| Dabei seit: 5427 Tagen \| Erstellt: 22:03 am 16. Jan. 2010

snoopy82 offline OC Newbie 14 Jahre dabei ! AMD Phenom II	good morning , yesterday evening , i test my intallation with a cat command and when i test with my remote , i see on the screen that the remote comunicate . But with irw , there 's nothing better Good day Ced
	Beiträge gesamt: 5 \| Durchschnitt: 0 Postings pro Tag Registrierung: Jan. 2010 \| Dabei seit: 5427 Tagen \| Erstellt: 10:19 am 17. Jan. 2010

ocinside
aus Krefeld
offline

Administrator
23 Jahre dabei !

Intel Core i9
3600 MHz @ 5200 MHz
78°C mit 1.552 Volt

Zitat von snoopy82 um 10:19 am Jan. 17, 2010

But with irw , there 's nothing better

Do you receive signals with irw (or mode2) or not?

When there's an error that irw can't connect, you might select the proper device.
Usually it's /dev/lirc but in some cases it could also be for example /dev/lirc0
In this case you can see the signals with:

Code

sudo mode2 --device /dev/lirc0

(escape with ctrl + c)

Did you already configure LIRC?

Code

sudo dpkg-reconfigure lirc

(select Igor plug ...)

Just write what you've already done and write your results.
Or read the LIRC step by step installation guide e.g. here or here

Hardware News lesen * Talk * Smarthome und Gadgets
Overclock, Modding und Testberichte * Fanartikel kaufen

Beiträge gesamt: 170924 | Durchschnitt: 20 Postings pro Tag
Registrierung: April 2001 | Dabei seit: 8610 Tagen | Erstellt: 11:34 am 18. Jan. 2010

New topic Answer