athlon xp pin mod for voltage increase -5

» Welcome to English «

New topic Answer

hatimh
aus UK
offline

OC Newbie
21 Jahre dabei !

In the new interactive pin mod guide it says:

"otherwise you're just able to build a higher Vcore depending to the actual L11 bridge
and Pin-Mod combinations."

What does the above statement mean or what is it trying to say exactly. The way I understood it is that by cutting the L11 bridges you reset the voltage to 0v and then by doing the mod you add 1.7v (if that's what you selected) so if I don't cut the L11 bridges then it will add 1.7v to the existing 1.6v (default). so total 3.3 v Vcore and my chip will fry.

If I have understood it correctly, then is their a way to add 0.1 v to the existing VCore with a pin mod? i.e. I have my 1700+ and I want to increase the VCore to 1.7 v is that possible without cutting the L11 bridges.

Many Thanks.

Beiträge gesamt: 2 | Durchschnitt: 0 Postings pro Tag
Registrierung: Aug. 2003 | Dabei seit: 7767 Tagen | Erstellt: 15:07 am 17. Aug. 2003

Beomaster
aus Dresden
offline

Real OC or Post God !
22 Jahre dabei !

AMD Phenom II
3200 MHz @ 3675 MHz
59°C mit 1.400 Volt

My English is not so very good to understand your whole question, but i can say, if you don't cut the L11 bridges the selectable voltages are limited, in the way that in your mind you have to add the connected pins on the socket on the modding. So if you have 1,6V on the bridges, you can select 1,65V 1,8V and 1,85V because of the connections for 1,6V. (look at the interactive pinmod, switch the voltages and look whats happen to the combinations). BVut this also means that for 1,65 and 1,8V you need only to connect 1 pair of pins and for 1,85V only 2 pairs of pins, because the other connections you have to add in your mind, if you doesn't cut the L11 bridges

edit: I belive cutting all L11 Bridges will cause 1,45V, but i'm not sure

(Geändert von Beomaster um 19:35 am Aug. 17, 2003)

[SiLa] BF2 BattleClan
Orgelgott

Beiträge gesamt: 19351 | Durchschnitt: 2 Postings pro Tag
Registrierung: Feb. 2002 | Dabei seit: 8309 Tagen | Erstellt: 18:10 am 17. Aug. 2003

hatimh aus UK offline OC Newbie 21 Jahre dabei !	Thank you for your kind response. It was bit selfish of me to come to this german forum and ask a question in English. I had a bit of a problem understanding ur response but I think I understood you in the end. Let's say I want 1.65v, I set the interactive guide for 1.6v and then 1.65v and look at the differences. The difference as you mentioned is just one extra joining of 2 pins. Thanks :)
	Beiträge gesamt: 2 \| Durchschnitt: 0 Postings pro Tag Registrierung: Aug. 2003 \| Dabei seit: 7767 Tagen \| Erstellt: 23:30 am 17. Aug. 2003

ocinside aus Krefeld offline Administrator 23 Jahre dabei ! Intel Core i9 3600 MHz @ 5200 MHz 78°C mit 1.552 Volt	Yes, this is right, but remember that if you like to get for example 1,625 Volt, it's not possible without cutting the right L11 bridge... and so on ... Or just cut all L11 bridges and then select each Vcore by all five pin-connections Hardware News lesen * Talk * Smarthome und Gadgets Overclock, Modding und Testberichte * Fanartikel kaufen
	Beiträge gesamt: 170907 \| Durchschnitt: 20 Postings pro Tag Registrierung: April 2001 \| Dabei seit: 8606 Tagen \| Erstellt: 5:55 am 18. Aug. 2003

SmerkO offline OC Newbie 21 Jahre dabei ! AMD Athlon XP	so i understand that if my chip runs at 1.75v (palomino) that means i can only select 1.85v if i dont wish to cut the l11 bridges?
	Beiträge gesamt: 4 \| Durchschnitt: 0 Postings pro Tag Registrierung: Juni 2003 \| Dabei seit: 7819 Tagen \| Erstellt: 16:42 am 19. Sep. 2003

ocinside aus Krefeld offline Administrator 23 Jahre dabei ! Intel Core i9 3600 MHz @ 5200 MHz 78°C mit 1.552 Volt	@SmerkO Yes, this is correct. Hardware News lesen * Talk * Smarthome und Gadgets Overclock, Modding und Testberichte * Fanartikel kaufen
	Beiträge gesamt: 170907 \| Durchschnitt: 20 Postings pro Tag Registrierung: April 2001 \| Dabei seit: 8606 Tagen \| Erstellt: 16:51 am 19. Sep. 2003

New topic Answer