» Welcome to English «

silvest
offline


OC Newbie
18 Jahre dabei !

AMD Barton
1833 MHz @ 2400 MHz
50°C mit 1.75 Volt


I have a Barton 2500+ (I think it's week 25 of year 2004 so it has a locked multi).

Question is, is it possible to unlock the multiplier?
I currently have it overclocked at 218 x 11 and can't go any higher... but my RAM has still lots of potential..

Thanks

Beiträge gesamt: 4 | Durchschnitt: 0 Postings pro Tag
Registrierung: März 2006 | Dabei seit: 6814 Tagen | Erstellt: 6:52 am 31. März 2006
silvest
offline


OC Newbie
18 Jahre dabei !

AMD Barton
1833 MHz @ 2400 MHz
50°C mit 1.75 Volt


oh and btw, I'm using a gigabyte (GA-7N400-L) Nforce2 motherboard

Beiträge gesamt: 4 | Durchschnitt: 0 Postings pro Tag
Registrierung: März 2006 | Dabei seit: 6814 Tagen | Erstellt: 7:04 am 31. März 2006
Beomaster
aus Dresden
offline



Real OC or Post God !
22 Jahre dabei !

AMD Phenom II
3200 MHz @ 3675 MHz
59°C mit 1.400 Volt


No, you have no chance to  unlock your CPU, if the chipset wouldnt be a nforce2, you could do the mobile mod...
will your CPU go higher if you give her a good cooling and raise a bit the VCore?


[SiLa] BF2 BattleClan
Orgelgott

Beiträge gesamt: 19351 | Durchschnitt: 2 Postings pro Tag
Registrierung: Feb. 2002 | Dabei seit: 8313 Tagen | Erstellt: 12:58 am 31. März 2006
silvest
offline


OC Newbie
18 Jahre dabei !

AMD Barton
1833 MHz @ 2400 MHz
50°C mit 1.75 Volt


unfortunately no. FSB can only go up to 218.. at 220 prime 95 keeps crashing.. It's not the RAM, but the CPU..

vcore is already at 1.75.. (my mobo only allows very little options to increase vcore. it allows "default", "+5%", "+7.5%" and "+10%". right now i'm at 7.5% so i have one last chance, but then vcore would be around 1.78 to 1.8v). temps is 52C idle and 57C load (but my mobo reads temps 8-12 degrees higher than ABit or others. if i change the bios revision to F1, then reported temperatures will reduce).


from http://www.ocworkbench.com/ocwbcgi/u...8;t=001387;p=0

QUOTE
At last, the Gigabyte FAQ for OCWorkbench has been released.

The motherboards that will be mentioned in this FAQ will be:

nForce3 (K8 Platform)
GA-K8NSNXP
GA-K8NSNXP-939
GA-K8NS Pro
GA-K8NS
GA-K8NNXP
GA-K8NNXP-940
GA-K8N Pro
GA-K8N

nForce2 (K7 Platform)
GA-7NNXP
GA-7N400 Pro
GA-7N400 Pro2
GA-7N400L1
GA-7N400L
GA-7N400E-L

Even if your motherboard is not listed (i.e the popular 7S748), some of these problems may apply to your board. Have a quick skim if that's the case.

MOST COMMON USER PROBLEMS: (this applies to most new Gigabyte motherboards)
Q: AHH! My temps are skyrocketing! My CPU is idling at 50+ degrees Celsius! What's wrong?!
A: Recent Gigabyte boards read the temperature from the CPU diode, rather than from a socket sensor. Therefore, you should expect temps that are about 8-12 degrees higher than usual.


And...


QUOTE
As proof, you should try flashing the first ever BIOS for your motherboard; you should see temps ~10 degrees lower.


QUOTE
I know that for my nForce2 motherboard, the 7N400-L, that the F1 BIOS will make temps ~10 degrees lower.

So, I guess my temps are still okay~ ;)

(Geändert von silvest um 9:11 am April 3, 2006)

Beiträge gesamt: 4 | Durchschnitt: 0 Postings pro Tag
Registrierung: März 2006 | Dabei seit: 6814 Tagen | Erstellt: 9:09 am 3. April 2006
fryc88
aus Poland, Tuchola
offline


OC Newbie
18 Jahre dabei !

AMD Athlon XP
1800 MHz @ 2250 MHz
36°C mit 1.83 Volt


about the temps, on my Epox 8rda+ i think i got lower temps, Motherboard Monitor tells me i got 34 degrees on fsb 133, but i think is TOO low...but now, my comp is on desk, without 'housing'(dont know the word :P )

Beiträge gesamt: 7 | Durchschnitt: 0 Postings pro Tag
Registrierung: Juni 2006 | Dabei seit: 6747 Tagen | Erstellt: 14:57 am 7. Juni 2006
ueker123
aus Dortmund
offline



OC God
18 Jahre dabei !

AMD Athlon 64 X2 Dual Core
2400 MHz @ 2400 MHz
35°C mit 1.40 Volt


It is like Beomaster told you.

Multi isn't changeable!!:thumb:


1. X2 4800+ @ SLI-DR, 4x 512 MB Corsair, 2x 7900 GTX Extreme Gamer
2. Sempron 3300 @ Asrock K8NF4G, 2x 512 MB G. Skill, X1600XT (HTPC in Arbeit)
3. AMD Athlon XP 2400+ @ DFI NF-2, 512 MB G. Skill, 6800 LE@GT

Beiträge gesamt: 1801 | Durchschnitt: 0 Postings pro Tag
Registrierung: Feb. 2006 | Dabei seit: 6857 Tagen | Erstellt: 17:37 am 21. Juli 2006