Intel Core i5 3200 MHz @ 3600 MHz 44°C mit 1.024 Volt
Is there anyone out there who can help me out with overclocking my athlonXP2000??? My System: Enmic 8NAX(Nforce2) 333Mhz Ram in Dualchannelmode AthlonXP 2000 WD80GB and I am running winxp prof. So my prob is that I am only able to raise my cpu to 1750Mhz and thats it I tried it on 200FSB but there I have even less only 1700Mhz. If I go higher then the screen stays black or windows won´t start So if there is anyone out there to help me
INTEL Sucks_Support AMD
Beiträge gesamt: 6907 | Durchschnitt: 1 Postings pro Tag Registrierung: Sep. 2003 | Dabei seit: 7771 Tagen | Erstellt: 9:16 am 9. Sep. 2003
I'll move this to the english speaking section if you don't mind. :)
Btw. have you tried to increase the vcore a little bit?
Listen, here's the thing. If you can't spot the sucker in the first half hour at the table, then you ARE the sucker.
Beiträge gesamt: 17202 | Durchschnitt: 2 Postings pro Tag Registrierung: Mai 2001 | Dabei seit: 8612 Tagen | Erstellt: 10:14 am 9. Sep. 2003
AMD Phenom II 3200 MHz @ 3675 MHz 59°C mit 1.400 Volt
Boahr, Sven, I've just written an answer and it wasn't able to send it, don't try this again, but now back to overclocking. That you reach only 1700MHz with 200MHz FSB could be because your Mainboard won't go higher. So try now with high multi and low FSB how high you will come. And maybe if the temperature is below 55°C you can raise the voltages a litle bit to get higher.
[SiLa] BF2 BattleClan Orgelgott
Beiträge gesamt: 19351 | Durchschnitt: 2 Postings pro Tag Registrierung: Feb. 2002 | Dabei seit: 8335 Tagen | Erstellt: 10:25 am 9. Sep. 2003
I'm awfully sorry Beo. I promise this won't happen again.
Listen, here's the thing. If you can't spot the sucker in the first half hour at the table, then you ARE the sucker.
Beiträge gesamt: 17202 | Durchschnitt: 2 Postings pro Tag Registrierung: Mai 2001 | Dabei seit: 8612 Tagen | Erstellt: 10:34 am 9. Sep. 2003
AMD Athlon 64 X2 Dual Core 2000 MHz @ 2500 MHz 48°C mit 1.35 Volt
As far as I know, your Board isn't very popular here! Does it deliver the usual NForce2 options? fixed AGP/PCI clock.... wide range of Multipliers... CoreVoltage .......
Does it officially support FSB200? (or, in other words: Is it the new NForce2 "Ultra" Chipset that supports Busspeeds of 200(+)?)
What type of XP2000+ are u using? ( maxing out at 1700 somehow sounds like a bad Palominostepping, did you assemble the rig yourself?)
Are you absolutely positive that your Ram works at speeds of 200 (x2)?
Some Information 'bout cooling and the PSU you use might turn out to be helpfull as well!
and, last but not least: Are you familiar with the the general techniques of OverClocking? (or is this your first attempt to get the maximum out of your CPU?)
(Geändert von MajorTom um 11:28 am Sep. 9, 2003)
Beiträge gesamt: 128 | Durchschnitt: 0 Postings pro Tag Registrierung: Juni 2002 | Dabei seit: 8218 Tagen | Erstellt: 11:26 am 9. Sep. 2003
Intel Core i5 3200 MHz @ 3600 MHz 44°C mit 1.024 Volt
@Major Tom 1frst =yes it does I am able to change the Muliti as much as I like also the Vcore dimms agp 2 yes with the latest Bios it does support FSB200 3 thats the thing I will find out later tonigt when I downloaded the Tool from AMD Site Palo or not 4 No Iam not then it is only 333Infineon in Dual Mode goes to 171Mhz and then 5 PSU???? anyway cooling in the mom arctic cooling copper silent steady by 52C 6 and yes I am a starter but I realy like it Its a lot of fun if it works I have made this thread up now on the german board and besides I got my Pc running now with 1.750Vcore@9x200FSB@1804MHZ and 5.2.2.2,5 and its running stable at 52c INTEL Sucks_Support AMD
Beiträge gesamt: 6907 | Durchschnitt: 1 Postings pro Tag Registrierung: Sep. 2003 | Dabei seit: 7771 Tagen | Erstellt: 13:55 am 10. Sep. 2003
Copyright 1999 - 2024 by www.ocinside.de - All rights reserved.
Unser PC Forum verwendet Cookies für einen optimalen Service. Durch die Nutzung dieser Webseite erklären Sie sich damit einverstanden, dass wir personenbezogene Daten wie z.B. die IP-Adresse speichern und wir zusammen mit Drittanbietern Cookies verwenden, um personalisierte Anzeigen zur interessengerechten Werbung und weitere externe Inhalte anzuzeigen. Einverstanden? Ja / Nein ImpressumDatenschutzEinstellungen