general pinmod questions (barton 2500) -3

» Welcome to English «

New topic Answer

Nakamori
offline

OC Newbie
19 Jahre dabei !

I have an athlon xp 2500+ barton, I'm thinking about doing this as my mobo is vcore locked. my multiplier is locked at 11 but I dont want to change it, do I still need to do the multiplier=11 pins or just the pins for the vcore? Same with the fsb- I dont want anything to change there. I don't need any pins for that either, right? Does this work with a locked cpu?

Do I have to do anything special, like cut the L1, L2 etc?

Beiträge gesamt: 3 | Durchschnitt: 0 Postings pro Tag
Registrierung: Juli 2005 | Dabei seit: 7063 Tagen | Erstellt: 8:27 am 22. Juli 2005

ocinside
aus Krefeld
online

Administrator
23 Jahre dabei !

Intel Core i9
3600 MHz @ 5200 MHz
78°C mit 1.552 Volt

First of all welcome in our forum

The Pin-mod will work fine for the FSB or Vcore mod, also with these newer locked processors.

If you like to increase the Vcore to 1.85 Volt it's not necessary to cut any bridges (the multi mod is not necessary).
But of course you have to open the L11 bridges, if ! you like to choose any exact Vcore lower than 1.85 Volt.
Otherwise you'll get a combination of the L11 bridges and the Pin-Mod.

Hardware News lesen * Talk * Smarthome und Gadgets
Overclock, Modding und Testberichte * Fanartikel kaufen

Beiträge gesamt: 170909 | Durchschnitt: 20 Postings pro Tag
Registrierung: April 2001 | Dabei seit: 8607 Tagen | Erstellt: 14:52 am 22. Juli 2005

Nakamori offline OC Newbie 19 Jahre dabei !	thanks for the clarification I dont have a mini drill around, how else can I cut the L11 bridges, will a sewing needle work? Also, how will I know if I've gone deep enough? do I just have to measure out .5-1.0 mm? (Geändert von Nakamori um 22:28 am Juli 22, 2005)
	Beiträge gesamt: 3 \| Durchschnitt: 0 Postings pro Tag Registrierung: Juli 2005 \| Dabei seit: 7063 Tagen \| Erstellt: 22:20 am 22. Juli 2005

Beomaster aus Dresden offline Real OC or Post God ! 22 Jahre dabei ! AMD Phenom II 3200 MHz @ 3675 MHz 59°C mit 1.400 Volt	it will be also possible to cut them with a very sharp knife, some cryzy guys even do it with 12V, but I belife this might be to much risk the Barton I have some month ago I cut the bridges with a knife to 1,5V, this was really enough for me if you want to go lower, like this you'll have to cut all L11 bridges [SiLa] BF2 BattleClan Orgelgott
	Beiträge gesamt: 19351 \| Durchschnitt: 2 Postings pro Tag Registrierung: Feb. 2002 \| Dabei seit: 8310 Tagen \| Erstellt: 22:32 am 22. Juli 2005

Nakamori offline OC Newbie 19 Jahre dabei !	Ok thanks- one last question. my mobo overvolts my cpu by about .05v. Do I have to take this .05v into account when doing the pin mod? will my 1.85V actually be 1.9?
	Beiträge gesamt: 3 \| Durchschnitt: 0 Postings pro Tag Registrierung: Juli 2005 \| Dabei seit: 7063 Tagen \| Erstellt: 17:47 am 23. Juli 2005

Beomaster
aus Dresden
offline

Real OC or Post God !
22 Jahre dabei !

AMD Phenom II
3200 MHz @ 3675 MHz
59°C mit 1.400 Volt

Hard to say, but first I would guess yes.
0,05V seems to be a lot, it is very seldom that a mobo has such a great difference from that voltage that it should give the CPU
But remember, using the wire trick without cutting the L11 Bridges, or even some L11 Bridges you only can add the wires to the socket

you have to imagine the wires from stock voltage are still set

so with 1,65V you are only able to reach 1,85V
with 1,6V you can reach 1,65 1,8 and 1,85V
and with 1,5V you can reach 1,55 1,6 1,65 1,7 1,75 1,8 and 1,85V

[SiLa] BF2 BattleClan
Orgelgott

Beiträge gesamt: 19351 | Durchschnitt: 2 Postings pro Tag
Registrierung: Feb. 2002 | Dabei seit: 8310 Tagen | Erstellt: 17:54 am 23. Juli 2005

ocinside aus Krefeld online Administrator 23 Jahre dabei ! Intel Core i9 3600 MHz @ 5200 MHz 78°C mit 1.552 Volt	Yes, it will be But don't worry about this, because it could also be a measure failure of your mobo. Hardware News lesen * Talk * Smarthome und Gadgets Overclock, Modding und Testberichte * Fanartikel kaufen
	Beiträge gesamt: 170909 \| Durchschnitt: 20 Postings pro Tag Registrierung: April 2001 \| Dabei seit: 8607 Tagen \| Erstellt: 17:54 am 23. Juli 2005

THE OVERCLOCKER aus Offenbach/Hessen offline OC God 20 Jahre dabei ! Intel Core i7 3200 MHz mit 1.20 Volt	Here is a good link for a pinmod //http://amd-cool.freeze.com Gib mehr,um viel zu erreichen ! Gib alles um mehr zu bekommen......
	Beiträge gesamt: 8026 \| Durchschnitt: 1 Postings pro Tag Registrierung: Aug. 2004 \| Dabei seit: 7416 Tagen \| Erstellt: 21:45 am 9. Nov. 2005

New topic Answer