AMD Thunderbird C 1400 MHz @ 1400 MHz 55°C mit 1.75 Volt
I will be manually changing the bridges on my Athlon Thunderbird 1400 in order to achieve some overclocking. In the painting guide here on the site, the writer/author states:
"Close all L1 bridges if you want to change the VCore and multiplier via BIOS or Jumper. Otherway leave all L1 connections open !!!"
My L1 Bridges are already connected. The CPU came this way from the manufacturer. Should I disconnect the L1 bridges? I will be changing the multiplier to 12.5 by changing the L3 L4 and L6 bridges. Will this work if I leave the L1 bridges connected? Do I need to disconnect them? Thank you!
Beiträge gesamt: 8 | Durchschnitt: 0 Postings pro Tag Registrierung: Jan. 2002 | Dabei seit: 8339 Tagen | Erstellt: 21:44 am 22. Jan. 2002
AMD Ryzen 5 4600 MHz @ 4600 MHz 55°C mit 1.29 Volt
no - you don´t have to.
if all L1 Bridges are already connected - you can choose the multiplicator by BIOS or Jumper.
in other words - if L1 Bridges are connected your CPU is UNLOCKED !!! Just Overclock !!
you can also close the L7 Bridges - that means the VCore is set from 1,75 --> 1,85 V.
Beiträge gesamt: 8093 | Durchschnitt: 1 Postings pro Tag Registrierung: Mai 2001 | Dabei seit: 8578 Tagen | Erstellt: 22:01 am 22. Jan. 2002
ChrisGlenn offline
OC Newbie 22 Jahre dabei !
AMD Thunderbird C 1400 MHz @ 1400 MHz 55°C mit 1.75 Volt
Thank you for your reply. I would use the bios to overclock but I have no bios options. I must use the painting guide and change my L3 L4 and L6 bridges. My question is do I need to disconnect the L1 in order for the L3 L4 L6 change to work correctly?
(Geändert von ChrisGlenn um 22:55 am Jan. 22, 2002)
(Geändert von ChrisGlenn um 22:56 am Jan. 22, 2002)
Beiträge gesamt: 8 | Durchschnitt: 0 Postings pro Tag Registrierung: Jan. 2002 | Dabei seit: 8339 Tagen | Erstellt: 22:53 am 22. Jan. 2002
AMD Ryzen 5 4600 MHz @ 4600 MHz 55°C mit 1.29 Volt
Hmm.... good question...
don´t now - yet
but what about your bios ??? is were a new Version? or a inofficial BIOS Version? what Mainboard did you have???
and what about JUMPERs onboard??? you can also use jumpers to modify the multiplier.
Beiträge gesamt: 8093 | Durchschnitt: 1 Postings pro Tag Registrierung: Mai 2001 | Dabei seit: 8578 Tagen | Erstellt: 0:51 am 23. Jan. 2002
ChrisGlenn offline
OC Newbie 22 Jahre dabei !
AMD Thunderbird C 1400 MHz @ 1400 MHz 55°C mit 1.75 Volt
I have an answer from posting at www.amdmb.com located here http://www.amdmb.com/vb/showthread.php?s=&postid=649088#post649088 A user by the name of myv65, states "If your motherboard doesn't support multiplier manipulation, then you must work with L3, L4, and L6. The status of L1 does not matter in this instance. If your motherboard does support multiplier adjustment, you should also leave L1 alone and simply use the BIOS or dipswitches as appropriate."
So I have my answer, I don't need to touch my L1 bridges.
In reply to your questions. I have just recieved the Chaintech 7SID motherboard, and it does not feature multiplier changing in the bios or with jumpers. No FSB changing is available either, only 100 or 133. This is why I must change the bridges. I have not been able to find an unofficial BIOS for the 7SID, I wish I could. thank you for your post.
Beiträge gesamt: 8 | Durchschnitt: 0 Postings pro Tag Registrierung: Jan. 2002 | Dabei seit: 8339 Tagen | Erstellt: 1:35 am 23. Jan. 2002
AMD Ryzen 5 4600 MHz @ 4600 MHz 55°C mit 1.29 Volt
Chaintech 7SID ????
with SIS 735 Chipset???
were are Softwaretools like CPU-FSB or CPU-COOl you can also use these tools to increase FSB Setting by Software.
btw - i´ve saw your temperature. 55°C @ 1400 MHz It´s TO HIGH !!! - okay - not yet - but if you want to overclock it WILL BE to HIGH!
and don´t forget - NOW we have winter - what would be in the summer ???
what kind of cpu-cooler did you use?
Beiträge gesamt: 8093 | Durchschnitt: 1 Postings pro Tag Registrierung: Mai 2001 | Dabei seit: 8578 Tagen | Erstellt: 8:44 am 23. Jan. 2002
ChrisGlenn offline
OC Newbie 22 Jahre dabei !
AMD Thunderbird C 1400 MHz @ 1400 MHz 55°C mit 1.75 Volt
Yes 55°C is hot I agree. But this is with the retail boxed processor heatsink. I am sure it is made by Cooler Master EP5-6i11-a1 For testing purposes, I wanted to see how much heat the CPU could sustain at the 1400 default speed. I used a hair dryer and I stopped once it said 73°C. I've never ever seen it that hot and I thought it would have crashed by then. I may be in for a super overclocker, if it can sustain heat like that at 1400. I am going to try for 1600 with multiplier changing alone to 12. I will be using the Millenuim Glaciator 2 with a c/w of .34 I have calculated this theory for 1600 MHz:
(C/W * WATTS = Delta) + Case = CPU Temp (0.34 * 91.6 = 31.1) + 30 = 61.1
too hot? Should I just satisfy myself with an overclock of 1540? Or should I go for 1600? There's really only one way to find out. Thats to do it.
(Geändert von ChrisGlenn um 15:04 am Jan. 23, 2002)
Beiträge gesamt: 8 | Durchschnitt: 0 Postings pro Tag Registrierung: Jan. 2002 | Dabei seit: 8339 Tagen | Erstellt: 15:02 am 23. Jan. 2002
hulio offline
OC Newbie 22 Jahre dabei !
AMD Athlon XP 1466 MHz @ 1650 MHz 48°C mit 1.90 Volt
i not get my multiplier off 16x. first i got nothing until being real careful about closing with silver correction pen and masking (thermal paste didnt work as insulator, mabe it conducted to the copper, or the copper was poking up???)
then i got 16x, so tried 16.5: cut first l3, close 3rd l3.:: still shows 16x at POST.
now i want to try 17x and am worried about correctly CUTTING the last l4 bridge, and as well i tried closing the 5 l1 bridges aND FAILED. just wouldnt do it. does the copper underneath that i cut with exacto knife flare up towards contacts mabe?
scared to CUT the first l4 scared i wont be able to get contact to CLOSE back anything, nomatter how careful.. what gives? everyone else gets it even with a crayon, i cant even with careful masking and corrective pen applied with a needle!!!
(Geändert von hulio um 7:32 am Feb. 21, 2002)
Beiträge gesamt: 7 | Durchschnitt: 0 Postings pro Tag Registrierung: Feb. 2002 | Dabei seit: 8312 Tagen | Erstellt: 7:20 am 21. Feb. 2002
Intel Core i9 3600 MHz @ 5200 MHz 78°C mit 1.552 Volt
I think your problem may be some scratches onto the surface beneath the bridges of your CPU. You should try to insulate a part around the bridges carefully to prevent a connection from any bridge to ground. Hardware News lesen * Talk * Smarthome und Gadgets Overclock, Modding und Testberichte * Fanartikel kaufen
Beiträge gesamt: 170907 | Durchschnitt: 20 Postings pro Tag Registrierung: April 2001 | Dabei seit: 8606 Tagen | Erstellt: 13:09 am 22. Feb. 2002
hulio offline
OC Newbie 22 Jahre dabei !
AMD Athlon XP 1466 MHz @ 1650 MHz 48°C mit 1.90 Volt
thanks. i realize that if i clean the bridges well and then contact them exactly from the centre, say, with the wire and silver cement method
before i have painted right across from one contact to the other and across the cut area in the middle which was insulated with super glue (i figure that would have covered it, but then i scrape off excess like shown at toms hardware, with a knife, and that probably could expose a little copper if it was flaring up)
Beiträge gesamt: 7 | Durchschnitt: 0 Postings pro Tag Registrierung: Feb. 2002 | Dabei seit: 8312 Tagen | Erstellt: 11:40 am 4. März 2002
Copyright 1999 - 2024 by www.ocinside.de - All rights reserved.
Unser PC Forum verwendet Cookies für einen optimalen Service. Durch die Nutzung dieser Webseite erklären Sie sich damit einverstanden, dass wir personenbezogene Daten wie z.B. die IP-Adresse speichern und wir zusammen mit Drittanbietern Cookies verwenden, um personalisierte Anzeigen zur interessengerechten Werbung und weitere externe Inhalte anzuzeigen. Einverstanden? Ja / Nein ImpressumDatenschutzEinstellungen
