ir receiver work on linux but not on winxp -2

» Welcome to English «

luckygala offline OC Newbie 16 Jahre dabei !	my ir receiver: "Self-made USB infrared receiver to remote control your PC" doesn't work on winxp on my laptop (Hp dv5000), the receiver is identified like "Unknown Device"... on linux Debian work great... on a pentium III 1000 Mhz (standalone machine) with winxp (sp1) work! any ideas? thanks
	Beiträge gesamt: 6 \| Durchschnitt: 0 Postings pro Tag Registrierung: Dez. 2007 \| Dabei seit: 6201 Tagen \| Erstellt: 10:02 am 6. Feb. 2009

ocinside
aus Krefeld
offline

Administrator
23 Jahre dabei !

Intel Core i9
3600 MHz @ 5200 MHz
78°C mit 1.552 Volt

There could be several reasons why this USB device isn't working proper with your laptop.

- the USB port is set to "USB 2.0 only" instead of "USB 1.1 and 2.0 support".
Please check the BIOS settings and enable also low speed USB 1.1 devices.

- the motherboard of your notebook doesn't offer constant 5 Volt supply on the USB port.

- or the port needs 3.3V on the data line - for this you'll find a solution in the driver installation guide.

Or try to connect the USB IR with an active USB hub to the notebook.

Hardware News lesen * Talk * Smarthome und Gadgets
Overclock, Modding und Testberichte * Fanartikel kaufen

Beiträge gesamt: 170924 | Durchschnitt: 20 Postings pro Tag
Registrierung: April 2001 | Dabei seit: 8610 Tagen | Erstellt: 8:45 am 9. Feb. 2009

luckygala offline OC Newbie 16 Jahre dabei !	if my pc don't have 5 volt constant on usb, i can put a battery on the riceiver ?
	Beiträge gesamt: 6 \| Durchschnitt: 0 Postings pro Tag Registrierung: Dez. 2007 \| Dabei seit: 6201 Tagen \| Erstellt: 0:24 am 28. Nov. 2009

ocinside
aus Krefeld
offline

Administrator
23 Jahre dabei !

Intel Core i9
3600 MHz @ 5200 MHz
78°C mit 1.552 Volt

It should be possible to connect the USB IR to an active USB hub and use a battery for the USB hub.
But using batteries would be the worst way and this isn't necessary.

Did you already try my previous suggestions ?
Because the latest USB Ultra IR v2.0 receiver development works with two zener diodes to get 3.3V on the USB data lines instead of 5 V.

Hardware News lesen * Talk * Smarthome und Gadgets
Overclock, Modding und Testberichte * Fanartikel kaufen

Beiträge gesamt: 170924 | Durchschnitt: 20 Postings pro Tag
Registrierung: April 2001 | Dabei seit: 8610 Tagen | Erstellt: 11:24 am 28. Nov. 2009

luckygala offline OC Newbie 16 Jahre dabei !	... yes... i try your suggestions: bios: my hp dv5165 doesn't have a configuration for usb legacy or other resistor of 100 ohm...same result... usb hub with alimentation...."the worst way and this isn't necessary".......like you say... i thing i take the USB 2.0 receiver...but i'm not able to solder very well...and i don't need the power on connection for my hp pavilion....
	Beiträge gesamt: 6 \| Durchschnitt: 0 Postings pro Tag Registrierung: Dez. 2007 \| Dabei seit: 6201 Tagen \| Erstellt: 22:00 am 3. Dez. 2009

ocinside aus Krefeld offline Administrator 23 Jahre dabei ! Intel Core i9 3600 MHz @ 5200 MHz 78°C mit 1.552 Volt	Try to use an usual USB hub without power (passive USB hub) and remove all hidden USB devices in the Windows XP device manager. Hardware News lesen * Talk * Smarthome und Gadgets Overclock, Modding und Testberichte * Fanartikel kaufen
	Beiträge gesamt: 170924 \| Durchschnitt: 20 Postings pro Tag Registrierung: April 2001 \| Dabei seit: 8610 Tagen \| Erstellt: 9:13 am 4. Dez. 2009

New topic Answer