|
|
|
BlackHawk
aus Ratingen
offline
OC God
22 Jahre dabei !
Intel Core i7
2933 MHz mit 1.145 Volt
|
     
übrigens hab was gefunden...
du hast dir beim modden wahrscheinlich irgendwie dein bios etwas zerschossen - ka wie, was und wo, aber du bist anscheinden nicht der einzige!!!
tritt scheinbar öfters auf, wenn man an der vdd rumlötet...
I had the exact same error when I modded my NB/SB, but I got out of it, so dont give up yet.
Here is what I did.
1. Disconnect power cable from PSU.
2. Remove battery.
3. Move clear cmos jumper over for a couple minutes.
4. put battery back in, then power cable.
5. Fire up your rig (hopefully)
This is a long shot, but I made a mistake once, maybe it was the RIGHT mistake...
1. Disconnect power cable from PSU.
2. Remove battery.
3. Move clear cmos jumper over for a couple minutes.
4. DO NOT put battery back in, put on power cable.
5. Fire up your rig, (it wont work)
6. Go through the PROPER procedure.
I say this because I forgot to put the battery back in once, and tried to start the computer. After the boot failed, I was going to attempt to clear cmos again, and realized that I forgot to put the battery in. So, I did it all over again, and remembered the battery. This time I was able to get into the bios and selected the fail safe defaults..
Hope it works for you.. Maybe I got lucky and stumbled on to something...
Oh, and at one point I tried putting a 98 startup disk in there too.
|
vielleicht bringt das ja was 
mfg BlackHawk
Schreibe kurz - und sie werden es lesen. Schreibe klar - und sie werden es verstehen. Schreibe bildhaft - und sie werden es im Gedächtnis behalten!
|
Beiträge gesamt: 9291 | Durchschnitt: 1 Postings pro Tag
Registrierung: Juli 2002 | Dabei seit: 8106 Tagen | Erstellt: 17:25 am 3. März 2003
|
|
|
|
|
|
|
|
xxmartin
offline
OC God
22 Jahre dabei !
AMD Athlon 64 X2 Dual Core
2000 MHz @ 3000 MHz
43°C mit 1.39 Volt
|
Zitat von BlackHawk am 17:25 am März 3, 2003
übrigens hab was gefunden...
du hast dir beim modden wahrscheinlich irgendwie dein bios etwas zerschossen - ka wie, was und wo, aber du bist anscheinden nicht der einzige!!!
tritt scheinbar öfters auf, wenn man an der vdd rumlötet...
I had the exact same error when I modded my NB/SB, but I got out of it, so dont give up yet.
Here is what I did.
1. Disconnect power cable from PSU.
2. Remove battery.
3. Move clear cmos jumper over for a couple minutes.
4. put battery back in, then power cable.
5. Fire up your rig (hopefully)
This is a long shot, but I made a mistake once, maybe it was the RIGHT mistake...
1. Disconnect power cable from PSU.
2. Remove battery.
3. Move clear cmos jumper over for a couple minutes.
4. DO NOT put battery back in, put on power cable.
5. Fire up your rig, (it wont work)
6. Go through the PROPER procedure.
I say this because I forgot to put the battery back in once, and tried to start the computer. After the boot failed, I was going to attempt to clear cmos again, and realized that I forgot to put the battery in. So, I did it all over again, and remembered the battery. This time I was able to get into the bios and selected the fail safe defaults..
Hope it works for you.. Maybe I got lucky and stumbled on to something...
Oh, and at one point I tried putting a 98 startup disk in there too.
|
vielleicht bringt das ja was
mfg BlackHawk
|
Danke Dir für Deine Mühen! Ich teste es gleich mal.
|
Beiträge gesamt: 3511 | Durchschnitt: 0 Postings pro Tag
Registrierung: Juli 2002 | Dabei seit: 8122 Tagen | Erstellt: 21:50 am 3. März 2003
|
|
|
|
|
|
|
|
|
|
|
|
