Ein Ausdruck des Beitrags mit 8 Antworten ergibt bei 3 Antworten pro Seite ca. 3 DIN A4 Seiten. Das entspricht bei 80 g/m² ca. 14.97 Gramm Papier.
-- Veröffentlicht durch Slidehammer am 21:15 am 20. Juni 2006
Teste mal in nem anderen Rechner mit Nero 6.
BTW: grade heute im Geschäft passiert: DVD-Brenner Toshiba braucht bei 16x bei ner DVD-R mit knapp 4 GB 1,5 Std. und DVD ist nicht lesbar. CDs brennt er schneller, aber auch Abbrüche und Rohlingsschrott...mit Verbatim-Rohlingen. Des Rätsels Lösung: Der Brenner lief im Pio-Modus und spackte deshalb rum. Rausgefunden hab ichs in Nero 6 unter W2K bei Nero-Info Tool unter dem Reiter Configuration - da muss beim Brenner DMA on stehn... sonst mal im Gerätemanager beim IDE-Controller an dem der Brenner hängt ein häkchen bei "DMA wenn möglich" machen und neu starten... Das hatte sich bei unserem Rechner auch irgendwie selbst verstellt...
-- Veröffentlicht durch DragonN am 17:22 am 20. Juni 2006
Also ich hab alle möglichen Rohlinge getestet von Aldi bis Sony, imemr abbruch.
Ich hab ein HL-DT-ST CD-RW GCE-8481B (glaube von LG) Hatte eigentlich noch nie probs damit, Alcohol hab ich installiert und 1 virtuelles LW ist vorhanden, aber dass hat noch nie probleme gemacht.
Wenn man beim Brennen zuhört klickt es manchmal leicht, ich glaube jeder kennt das.
Ja ich hab die Möglichkeit es in einem andern PC zu testen.
-- Veröffentlicht durch ExsistenZ am 15:56 am 20. Juni 2006
1.Von welcher Firma ist der Brenner
2.Hast du virtuelle Laufwerke ?
Sieht nähmlich so aus als würde Nero versuchen mit dem Alcohol Image Drive zu brennen
-- Veröffentlicht durch thepunk am 15:37 am 20. Juni 2006
was für rohlinge?
ich hatte mal nen paar ganz billige ausm aldi, da hatte ich 70% ausschuss...
wenn das aber markenrohlinge sind, siehts bös aus.
is das von jetzt auf gleich passiert (keine installationen, treiberupdates etc.)? haste möglichkeiten, in deinem rechner nen anderen brenner oder deinen brenner in nem anderen rechner zu testen?
-- Veröffentlicht durch DragonN am 13:17 am 20. Juni 2006
nero 6 hab ich noch nich versucht, hab mir grade rohlinge gekauft und das brennen ging auf jeden fall weiter aber auch dann wieder error...
ich könnte kotzen
Code
Nico
THC
5C80001080100000000606033502
Windows XP 5.1
IA32
WinAspi: -
ahead WinASPI: File 'C:\Programme\Nero\Nero 7\Core\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 02.11.2004 13:54:32
NT-SPTI used
Nero Version: 7.2.0.3
Internal Version: 7, 2, 0, 3
Recorder: <HL-DT-ST CD-RW GCE-8481B>Version: 1.05 - HA 1 TA 1 - 7.2.0.3
Adapter driver: <IDE> HA 1
Drive buffer : 2048kB
Bus Type : default (0) -> ATAPI, detected: ?
CD-ROM: <MS0911J VIR043X >Version: 2.0B - HA 1 TA 2 - 7.2.0.3
Adapter driver: <SCSI> HA 1
=== Scsi-Device-Map ===
DiskPeripheral : ST3250624AS atapi Port 0 ID 0 DMA: On
CdRomPeripheral : LITEON DVD-ROM LTD163 atapi Port 1 ID 0 DMA: On
CdRomPeripheral : HL-DT-ST CD-RW GCE-8481B atapi Port 1 ID 1 DMA: Off
DiskPeripheral : IBM DNES-318350W SA30 aic78xx Port 2 ID 0 DMA: Off
CdRomPeripheral : MS0911J VIR043X 2.0B vaxscsi Port 4 ID 0 DMA: Off
=== CDRom-Device-Map ===
MS0911J VIR043X D: CDRom2
LITEON DVD-ROM LTD163 E: CDRom0
HL-DT-ST CD-RW GCE-8481B F: CDRom1
=======================
AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 74448896 (0) Byte
BUFE : 0
Physical memory : 511MB (523756kB)
Free physical memory: 133MB (136812kB)
Memory in use : 73 %
Uncached PFiles: 0x0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)
20.6.2006
CD Image
12:55:42#1 Text 0 File Burncd.cpp, Line 3068
HL-DT-ST CD-RW GCE-8481B
Buffer underrun protection activated
12:55:42#2 Text 0 File ThreadedTransfer.cpp, Line 531
ReadBuffer-Pipe got 72704KB of Memory
12:55:42#3 Text 0 File Reader.cpp, Line 124
Reader running
12:55:42#4 Text 0 File Writer.cpp, Line 113
Writer F: HL-DT-ST CD-RW GCE-8481B running
12:55:42#5 Text 0 File Burncd.cpp, Line 3365
Turn on Track-At-Once, using CD-R/RW media
12:55:42#6 Text 0 File DlgWaitCD.cpp, Line 289
Last possible write address on media: 359848 ( 79:59.73)
Last address to be written: 356462 ( 79:14.62)
12:55:42#7 Text 0 File DlgWaitCD.cpp, Line 301
Write in overburning mode: NO (enabled: CD)
12:55:42#8 Text 0 File DlgWaitCD.cpp, Line 2715
Recorder: HL-DT-ST CD-RW GCE-8481B;
CDR code: 00 97 22 67; OSJ entry from: Daxon Technology, Inc.
ATIP Data:
Special Info [hex] 1: 00 00 00, 2: 00 00 00 (LI 0:00.00), 3: 00 00 00 (LO 0:00.00)
Additional Info [hex] 1: 00 00 00 (invalid), 2: 00 00 00 (invalid), 3: 00 00 00 (invalid)
12:55:42#9 Text 0 File DlgWaitCD.cpp, Line 473
>>> Protocol of DlgWaitCD activities: <<<
=========================================
12:55:42#10 Text 0 File ThreadedTransferInterface.cpp, Line 847
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 (2 - CD-ROM Mode 1, Joliet)
2 indices, index0 (150) not provided
original disc pos #0 + 356463 (356463) = #356463/79:12.63
relocatable, disc pos for caching/writing not required/not required, patch infos
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 356461 blocks [F: HL-DT-ST CD-RW GCE-8481B]
--------------------------------------------------------------
12:55:42#11 Text 0 File ThreadedTransferInterface.cpp, Line 1059
Prepare recorder [F: HL-DT-ST CD-RW GCE-8481B] for write in TAO
DAO infos:
==========
MCN: ""
TOCType: 0x00; Session Closed, disc not fixated
Tracks 1 to 1:
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 307200 730343424, ISRC ""
DAO layout:
===========
__Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep__________
-150 | lead-in | 0 | 0x41 | 0x00
-150 | 1 | 0 | 0x41 | 0x00
0 | 1 | 1 | 0x41 | 0x00
356463 | lead-out | 1 | 0x41 | 0x00
12:55:42#12 Text 0 File ThreadedTransferInterface.cpp, Line 1127
Removed 2 run-out blocks from end of track 1. Length: 356463 -> 356461.
12:55:42#13 Text 0 File SCSIPassThrough.cpp, Line 39
SPTILockVolume - completed successfully for FCTL_LOCK_VOLUME
12:55:42#14 Text 0 File SCSIPassThrough.cpp, Line 84
SPTIDismountVolume - completed successfully for FSCTL_DISMOUNT_VOLUME
12:55:42#15 Phase 24 File dlgbrnst.cpp, Line 1730
Caching of files started
12:55:42#16 Text 0 File Burncd.cpp, Line 4199
Cache writing successful.
12:55:42#17 Phase 25 File dlgbrnst.cpp, Line 1730
Caching of files completed
12:55:42#18 Phase 36 File dlgbrnst.cpp, Line 1730
Burn process started at 40x (6.000 KB/s)
12:55:42#19 Text 0 File ThreadedTransferInterface.cpp, Line 2707
Verifying disc position of item 0 (relocatable, no disc pos, patch infos, orig at #0): write at #0
12:55:42#20 Text 0 File MMC.cpp, Line 21963
Set BUFE: Buffer underrun protection -> ON
12:59:09#21 SPTI -1135 File SCSIPassThrough.cpp, Line 290
F: CdRom1: SCSIStatus(x02) WinError(0) NeroError(-1135)
Sense Key: 0x03 (KEY_MEDIUM_ERROR)
Sense Code: 0x0C
Sense Qual: 0x00
CDB Data: 0x2A 00 00 03 46 00 00 00 20 00 00 00
Sense Area: 0x71 00 03 00 00 00 00 0A 00 00 00 00 0C
Buffer x04fb0000: Len x10000
0xB4 B4 20 07 D4 DD 6D 57 EA D0 05 13 EB 5D 9E 55
0x13 17 AE AC 73 57 FA 13 A6 57 F3 D4 55 5E BF EA
0x52 17 2C 99 37 4F F5 37 B9 2A DD E6 2A D8 4F 57
12:59:09#22 CDR -1135 File Writer.cpp, Line 302
Write error
F: HL-DT-ST CD-RW GCE-8481B
12:59:09#23 Text 0 File ThreadedTransfer.cpp, Line 228
all writers idle, stopping conversion
12:59:09#24 Text 0 File ThreadedTransfer.cpp, Line 222
conversion idle, stopping reader
12:59:09#25 CDR -201 File WriterStatus.cpp, Line 200
Invalid write state
F: HL-DT-ST CD-RW GCE-8481B
12:59:09#26 TRANSFER -18 File WriterStatus.cpp, Line 200
Could not perform EndTrack
12:59:09#27 Text 0 File MMC.cpp, Line 16729
<HL-DT-STCD-RW GCE-8481B > start Close Session
13:00:24#28 Phase 38 File dlgbrnst.cpp, Line 1730
Burn process failed at 40x (6.000 KB/s)
Existing drivers:
File 'Drivers\CDRALW2K.SYS': Ver=8.0.0.212 , size=2560 bytes, created 19.05.2006 23:16:24
File 'Drivers\PXHELP20.SYS': Ver=3.00.11B, size=46080 bytes, created 16.05.2006 22:23:54 (Prassi/Veritas driver for win 2K)
File 'Drivers\scsiport.sys': Ver=5.1.2600.2180 (xpsp_sp2_rtm.040803-2158), size=96256 bytes, created 03.08.2004 22:59:42 (Adapter driver for src)
Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)
|
-- Veröffentlicht durch kawabiker1971 am 22:51 am 19. Juni 2006
macht er diese fehlermeldung auch mit nero 6?
-- Veröffentlicht durch Slidehammer am 22:47 am 19. Juni 2006
Tipp mal die Fehlermeldung bei Google rein :thumb:
So bin ich dem schleichenden Tod eines Sony-Brenners im Betrieb auch auf die Schliche gekommen:thumb:
-- Veröffentlicht durch DragonN am 22:40 am 19. Juni 2006
Hey, topic sagt alles, hier 2 logfiles von nero:
Code
Nico
THC
5C80001080100000000606033502
Windows XP 5.1
IA32
WinAspi: -
ahead WinASPI: File 'N:\Programme\Nero 7\Core\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 02.11.2004 12:54:32
NT-SPTI used
Nero Version: 7.0.5.4
Internal Version: 7, 0, 5, 4
Recorder: <HL-DT-ST CD-RW GCE-8481B>Version: 1.05 - HA 1 TA 1 - 7.0.5.4
Adapter driver: <IDE> HA 1
Drive buffer : 2048kB
Bus Type : default (0) -> ATAPI, detected: ?
CD-ROM: <MS0911J VIR043X >Version: 2.0B - HA 1 TA 2 - 7.0.5.4
Adapter driver: <SCSI> HA 1
=== Scsi-Device-Map ===
DiskPeripheral : ST3250624AS atapi Port 0 ID 0 DMA: On
CdRomPeripheral : LITEON DVD-ROM LTD163 atapi Port 1 ID 0 DMA: On
CdRomPeripheral : HL-DT-ST CD-RW GCE-8481B atapi Port 1 ID 1 DMA: Off
DiskPeripheral : IBM DNES-318350W SA30 aic78xx Port 2 ID 0 DMA: Off
CdRomPeripheral : MS0911J VIR043X 2.0B vaxscsi Port 4 ID 0 DMA: Off
=== CDRom-Device-Map ===
MS0911J VIR043X D: CDRom2
LITEON DVD-ROM LTD163 E: CDRom0
HL-DT-ST CD-RW GCE-8481B F: CDRom1
=======================
AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 74448896 (0) Byte
BUFE : 0
Physical memory : 511MB (523756kB)
Free physical memory: 141MB (144584kB)
Memory in use : 72 %
Uncached PFiles: 0x0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)
19.6.2006
CD Image
22:27:32#1 Text 0 File Burncd.cpp, Line 3044
HL-DT-ST CD-RW GCE-8481B
Schutz vor Pufferleerlauf aktiviert
22:27:32#2 Text 0 File ThreadedTransfer.cpp, Line 531
ReadBuffer-Pipe got 72704KB of Memory
22:27:32#3 Text 0 File Reader.cpp, Line 124
Reader running
22:27:32#4 Text 0 File Writer.cpp, Line 113
Writer F: HL-DT-ST CD-RW GCE-8481B running
22:27:32#5 Text 0 File Burncd.cpp, Line 3341
Turn on Track-At-Once, using CD-R/RW media
22:27:33#6 Text 0 File DlgWaitCD.cpp, Line 288
Last possible write address on media: 359848 ( 79:59.73)
Last address to be written: 356462 ( 79:14.62)
22:27:33#7 Text 0 File DlgWaitCD.cpp, Line 300
Write in overburning mode: NO (enabled: CD)
22:27:33#8 Text 0 File DlgWaitCD.cpp, Line 2699
Recorder: HL-DT-ST CD-RW GCE-8481B;
CDR code: 00 97 27 18; OSJ entry from: Plasmon Data systems Ltd.
ATIP Data:
Special Info [hex] 1: 00 00 00, 2: 00 00 00 (LI 0:00.00), 3: 00 00 00 (LO 0:00.00)
Additional Info [hex] 1: 00 00 00 (invalid), 2: 00 00 00 (invalid), 3: 00 00 00 (invalid)
22:27:33#9 Text 0 File DlgWaitCD.cpp, Line 472
>>> Protocol of DlgWaitCD activities: <<<
=========================================
22:27:33#10 Text 0 File ThreadedTransferInterface.cpp, Line 847
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 (2 - CD-ROM Modus 1, Joliet)
2 indices, index0 (150) not provided
original disc pos #0 + 356463 (356463) = #356463/79:12.63
relocatable, disc pos for caching/writing not required/not required, patch infos
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 356461 blocks [F: HL-DT-ST CD-RW GCE-8481B]
--------------------------------------------------------------
22:27:33#11 Text 0 File ThreadedTransferInterface.cpp, Line 1059
Prepare recorder [F: HL-DT-ST CD-RW GCE-8481B] for write in TAO
DAO infos:
==========
MCN: ""
TOCType: 0x00; Session Closed, disc not fixated
Tracks 1 to 1:
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 307200 730343424, ISRC ""
DAO layout:
===========
__Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep__________
-150 | lead-in | 0 | 0x41 | 0x00
-150 | 1 | 0 | 0x41 | 0x00
0 | 1 | 1 | 0x41 | 0x00
356463 | lead-out | 1 | 0x41 | 0x00
22:27:33#12 Text 0 File ThreadedTransferInterface.cpp, Line 1127
Removed 2 run-out blocks from end of track 1. Length: 356463 -> 356461.
22:27:33#13 Text 0 File SCSIPassThrough.cpp, Line 39
SPTILockVolume - completed successfully for FCTL_LOCK_VOLUME
22:27:33#14 Text 0 File SCSIPassThrough.cpp, Line 84
SPTIDismountVolume - completed successfully for FSCTL_DISMOUNT_VOLUME
22:27:33#15 Phase 24 File dlgbrnst.cpp, Line 1730
Caching of files started
22:27:33#16 Text 0 File Burncd.cpp, Line 4175
Cache writing successful.
22:27:33#17 Phase 25 File dlgbrnst.cpp, Line 1730
Caching of files completed
22:27:33#18 Phase 36 File dlgbrnst.cpp, Line 1730
Burn process started at 40x (6.000 KB/s)
22:27:33#19 Text 0 File ThreadedTransferInterface.cpp, Line 2685
Verifying disc position of item 0 (relocatable, no disc pos, patch infos, orig at #0): write at #0
22:27:33#20 Text 0 File MMC.cpp, Line 21850
Set BUFE: Buffer underrun protection -> ON
22:29:09#21 SPTI -1135 File SCSIPassThrough.cpp, Line 290
F: CdRom1: SCSIStatus(x02) WinError(0) NeroError(-1135)
Sense Key: 0x03 (KEY_MEDIUM_ERROR)
Sense Code: 0x0C
Sense Qual: 0x00
CDB Data: 0x2A 00 00 00 94 20 00 00 20 00 00 00
Sense Area: 0x71 00 03 00 00 00 00 0A 00 00 00 00 0C
Buffer x0a600000: Len x10000
0x3E 86 EC B1 A9 49 2A 7A 89 3A 6C F7 AC 68 E7 C2
0x69 E9 39 39 F6 94 EC A2 C2 22 8F 3B 3D 37 DA 36
0x9A 9D A9 79 F9 B9 D1 1C 15 E7 65 A6 17 65 E7 E7
22:29:09#22 CDR -1135 File Writer.cpp, Line 302
Write error
F: HL-DT-ST CD-RW GCE-8481B
22:29:09#23 Text 0 File ThreadedTransfer.cpp, Line 228
all writers idle, stopping conversion
22:29:09#24 Text 0 File ThreadedTransfer.cpp, Line 222
conversion idle, stopping reader
22:29:09#25 CDR -201 File WriterStatus.cpp, Line 200
Invalid write state
F: HL-DT-ST CD-RW GCE-8481B
22:29:09#26 TRANSFER -18 File WriterStatus.cpp, Line 200
Could not perform EndTrack
22:29:09#27 Text 0 File MMC.cpp, Line 16618
<HL-DT-STCD-RW GCE-8481B > start Close Session
22:29:10#28 Phase 38 File dlgbrnst.cpp, Line 1730
Burn process failed at 40x (6.000 KB/s)
Existing drivers:
File 'Drivers\CDRALW2K.SYS': Ver=8.0.0.212 , size=2560 bytes, created 19.05.2006 23:16:24
File 'Drivers\PXHELP20.SYS': Ver=3.00.11B, size=46080 bytes, created 16.05.2006 22:23:54 (Prassi/Veritas driver for win 2K)
File 'Drivers\scsiport.sys': Ver=5.1.2600.2180 (xpsp_sp2_rtm.040803-2158), size=96256 bytes, created 03.08.2004 22:59:42 (Adapter driver for src)
Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)
|
Und das 2.
Code
Nico
THC
5C80001080100000000606033502
Windows XP 5.1
IA32
WinAspi: -
ahead WinASPI: File 'N:\Programme\Nero 7\Core\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 02.11.2004 12:54:32
NT-SPTI used
Nero Version: 7.0.5.4
Internal Version: 7, 0, 5, 4
Recorder: <HL-DT-ST CD-RW GCE-8481B>Version: 1.05 - HA 1 TA 1 - 7.0.5.4
Adapter driver: <IDE> HA 1
Drive buffer : 2048kB
Bus Type : default (0) -> ATAPI, detected: ?
CD-ROM: <MS0911J VIR043X >Version: 2.0B - HA 1 TA 2 - 7.0.5.4
Adapter driver: <SCSI> HA 1
=== Scsi-Device-Map ===
DiskPeripheral : ST3250624AS atapi Port 0 ID 0 DMA: On
CdRomPeripheral : LITEON DVD-ROM LTD163 atapi Port 1 ID 0 DMA: On
CdRomPeripheral : HL-DT-ST CD-RW GCE-8481B atapi Port 1 ID 1 DMA: Off
DiskPeripheral : IBM DNES-318350W SA30 aic78xx Port 2 ID 0 DMA: Off
CdRomPeripheral : MS0911J VIR043X 2.0B vaxscsi Port 4 ID 0 DMA: Off
=== CDRom-Device-Map ===
MS0911J VIR043X D: CDRom2
LITEON DVD-ROM LTD163 E: CDRom0
HL-DT-ST CD-RW GCE-8481B F: CDRom1
=======================
AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 74448896 (0) Byte
BUFE : 0
Physical memory : 511MB (523756kB)
Free physical memory: 135MB (138340kB)
Memory in use : 73 %
Uncached PFiles: 0x0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)
19.6.2006
CD Image
22:32:44#1 Text 0 File Burncd.cpp, Line 3044
HL-DT-ST CD-RW GCE-8481B
Schutz vor Pufferleerlauf aktiviert
22:32:44#2 Text 0 File ThreadedTransfer.cpp, Line 531
ReadBuffer-Pipe got 72704KB of Memory
22:32:44#3 Text 0 File Reader.cpp, Line 124
Reader running
22:32:44#4 Text 0 File Writer.cpp, Line 113
Writer F: HL-DT-ST CD-RW GCE-8481B running
22:32:44#5 Text 0 File Burncd.cpp, Line 3341
Turn on Track-At-Once, using CD-R/RW media
22:32:45#6 Text 0 File DlgWaitCD.cpp, Line 288
Last possible write address on media: 359845 ( 79:59.70)
Last address to be written: 356462 ( 79:14.62)
22:32:45#7 Text 0 File DlgWaitCD.cpp, Line 300
Write in overburning mode: NO (enabled: CD)
22:32:45#8 Text 0 File DlgWaitCD.cpp, Line 2699
Recorder: HL-DT-ST CD-RW GCE-8481B;
CDR code: 00 97 26 66; OSJ entry from: CMC Magnetics Corporation
ATIP Data:
Special Info [hex] 1: 00 00 00, 2: 00 00 00 (LI 0:00.00), 3: 00 00 00 (LO 0:00.00)
Additional Info [hex] 1: 00 00 00 (invalid), 2: 00 00 00 (invalid), 3: 00 00 00 (invalid)
22:32:45#9 Text 0 File DlgWaitCD.cpp, Line 472
>>> Protocol of DlgWaitCD activities: <<<
=========================================
22:32:45#10 Text 0 File ThreadedTransferInterface.cpp, Line 847
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 (2 - CD-ROM Modus 1, Joliet)
2 indices, index0 (150) not provided
original disc pos #0 + 356463 (356463) = #356463/79:12.63
relocatable, disc pos for caching/writing not required/not required, patch infos
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 356461 blocks [F: HL-DT-ST CD-RW GCE-8481B]
--------------------------------------------------------------
22:32:45#11 Text 0 File ThreadedTransferInterface.cpp, Line 1059
Prepare recorder [F: HL-DT-ST CD-RW GCE-8481B] for write in TAO
DAO infos:
==========
MCN: ""
TOCType: 0x00; Session Closed, disc not fixated
Tracks 1 to 1:
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 307200 730343424, ISRC ""
DAO layout:
===========
__Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep__________
-150 | lead-in | 0 | 0x41 | 0x00
-150 | 1 | 0 | 0x41 | 0x00
0 | 1 | 1 | 0x41 | 0x00
356463 | lead-out | 1 | 0x41 | 0x00
22:32:45#12 Text 0 File ThreadedTransferInterface.cpp, Line 1127
Removed 2 run-out blocks from end of track 1. Length: 356463 -> 356461.
22:32:45#13 Text 0 File SCSIPassThrough.cpp, Line 39
SPTILockVolume - completed successfully for FCTL_LOCK_VOLUME
22:32:45#14 Text 0 File SCSIPassThrough.cpp, Line 84
SPTIDismountVolume - completed successfully for FSCTL_DISMOUNT_VOLUME
22:32:45#15 Phase 24 File dlgbrnst.cpp, Line 1730
Caching of files started
22:32:45#16 Text 0 File Burncd.cpp, Line 4175
Cache writing successful.
22:32:45#17 Phase 25 File dlgbrnst.cpp, Line 1730
Caching of files completed
22:32:45#18 Phase 36 File dlgbrnst.cpp, Line 1730
Burn process started at 40x (6.000 KB/s)
22:32:45#19 Text 0 File ThreadedTransferInterface.cpp, Line 2685
Verifying disc position of item 0 (relocatable, no disc pos, patch infos, orig at #0): write at #0
22:32:45#20 Text 0 File MMC.cpp, Line 21850
Set BUFE: Buffer underrun protection -> ON
22:34:15#21 SPTI -1135 File SCSIPassThrough.cpp, Line 290
F: CdRom1: SCSIStatus(x02) WinError(0) NeroError(-1135)
Sense Key: 0x03 (KEY_MEDIUM_ERROR)
Sense Code: 0x0C
Sense Qual: 0x00
CDB Data: 0x2A 00 00 00 B0 40 00 00 20 00 00 00
Sense Area: 0x71 00 03 00 00 00 00 0A 00 00 00 00 0C
Buffer x04660000: Len x10000
0xED AF A8 2B 82 12 23 95 0E 38 C5 51 92 61 54 DA
0x80 89 2A 11 40 D5 CC 84 6A E4 89 EA A1 BF 70 2E
0xAF EA 6C D2 10 04 2C 79 84 76 38 02 00 8C A2 C3
22:34:15#22 CDR -1135 File Writer.cpp, Line 302
Write error
F: HL-DT-ST CD-RW GCE-8481B
22:34:15#23 Text 0 File ThreadedTransfer.cpp, Line 228
all writers idle, stopping conversion
22:34:15#24 Text 0 File ThreadedTransfer.cpp, Line 222
conversion idle, stopping reader
22:34:16#25 CDR -201 File WriterStatus.cpp, Line 200
Invalid write state
F: HL-DT-ST CD-RW GCE-8481B
22:34:16#26 TRANSFER -18 File WriterStatus.cpp, Line 200
Could not perform EndTrack
22:34:16#27 Text 0 File MMC.cpp, Line 16618
<HL-DT-STCD-RW GCE-8481B > start Close Session
22:34:53#28 Phase 38 File dlgbrnst.cpp, Line 1730
Burn process failed at 40x (6.000 KB/s)
Existing drivers:
File 'Drivers\CDRALW2K.SYS': Ver=8.0.0.212 , size=2560 bytes, created 19.05.2006 23:16:24
File 'Drivers\PXHELP20.SYS': Ver=3.00.11B, size=46080 bytes, created 16.05.2006 22:23:54 (Prassi/Veritas driver for win 2K)
File 'Drivers\scsiport.sys': Ver=5.1.2600.2180 (xpsp_sp2_rtm.040803-2158), size=96256 bytes, created 03.08.2004 22:59:42 (Adapter driver for src)
Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)
|
|