Unlock multiplier asus a7m266d ?

- OCinside.de PC Forum
https://www.ocinside.de

-- English
https://www.forum-inside.de/forums.cgi?forum=14

--- Unlock multiplier asus a7m266d ?
https://www.forum-inside.de/topic.cgi?forum=14&topic=76

-- Veröffentlicht durch ocinside am 20:06 am 2. Okt. 2003

@Iznobad yes, it's more than easy with the Pin-Mod guide :)
But don't forget to connect the five L1 bridges first, if they aren't already connected yet.

-- Veröffentlicht durch Iznobad am 13:04 am 1. Okt. 2003

Hi,

I have the same motherboard as you do. I have two Athlon XP Palominos same as you.

Right now I'm running FSB og 100 :(
I have to keep the CPU speed down otherwise they use too much power and then my machine reboots (my powersupply is too small.)

I want to run at FSB 133 or maybe 166 if possible.

On this site i found this brilliant guide/grpahics for how to set my multiplier manually.

https://www.ocinside.de/go_d.html?/html/workshop/pinmod/amd_pinmod_d.html

It uses a wire around the underside of some selected pins. Much easier than messing around with conductive paint. I cannot wait to try it out at home!

I will first try with the 5xFSB multiplier and then slowly increase my FSB in bios, until i get crashes or reboots. then hopefully I'll be running at 5x166 = 830 mhz. When that works, I'll try to up the multiplier. Remember FSB is more important than multiplier, since it affects everything and multiplier only affects the CPU

-- Veröffentlicht durch Beomaster am 20:06 am 22. Aug. 2003

i was not sure about the size of Europe :lol: but obviously corallus was faster then me, i didn't recognize that he has postet 2 minutes before me

-- Veröffentlicht durch WaSaBi am 19:49 am 22. Aug. 2003

-- Veröffentlicht durch Beomaster am 19:33 am 22. Aug. 2003

do you mean this?
http://www.contacteast.com/product/group.asp?parent_id=3051
i need 40 seconds to found it in the web, i don't know the english word, but in germany we call this "Suchmaschine" (foundet by google.de, searchstring: Circuit Works Silver Conductive Grease)

-- Veröffentlicht durch corallus am 19:31 am 22. Aug. 2003

In Switzerland is this the Firm "Derendinger", hi is an big Firm who sale Car Repair Pices. The CircuitWorks Silver Conductive Grease is needed for Repair Heaters for Car(back)windows.

Regards Markus

-- Veröffentlicht durch WaSaBi am 19:22 am 22. Aug. 2003

thanks,this is clear Now =)

another question =)

where can find in europe this :CircuitWorks Silver Conductive Grease ?

thanks

-- Veröffentlicht durch corallus am 18:38 am 22. Aug. 2003

Hi

You should to close the L1 bridges.....because you have an "Palamino" - if you have an "T-bred" or "Barton" you dont must close this bridges.....

Regards Markus

-- Veröffentlicht durch WaSaBi am 15:39 am 22. Aug. 2003

hi

another question

find this in your guide: at the end...

"Close all L1 bridges if you want to change the multiplier via BIOS or Jumper."

I can't do that....a7m266D,no bios option and no jumpers for multiplier!


"Otherway leave all L1 connections open."

So ?

Do i close the L1 or not ?

thanks...

-- Veröffentlicht durch corallus am 22:28 am 21. Aug. 2003

:thumb: Just like Jens says...........

Regards corallus

-- Veröffentlicht durch ocinside am 20:16 am 21. Aug. 2003

Wasabi - great name - I know a really great advertisement video of wassup (Budweiser) :thumb:

But you need to connect the five L1 bridges of both CPUs first to UNLOCK the multiplier.
After this short mod it's possible to change the multi via BIOS, Pin-Mod, etc.
You'll find all necessary guides in the workshop section (english and german) :)

-- Veröffentlicht durch WaSaBi am 20:05 am 21. Aug. 2003

thanks for the answer,but i m not sure of what i ll must do.

i read the pin mod instruction,there 5 methods.

what are you really do to UNLOCK the multiplier ?

do you change something on the Mb,or on the 2 processors?

what is the easiest solution ?

thanks

-- Veröffentlicht durch corallus am 17:56 am 21. Aug. 2003

Use the "Pin Mod Instruction" from this Side. So my A7M266-D runs now at 16*141 MHz :)

If you have any problems with this Board, please post it here - i try to help .......

Regards corallus

-- Veröffentlicht durch WaSaBi am 15:47 am 21. Aug. 2003

hi

i search all over google and specialist website,but never found solution to unlock multiplier on this mb.

how unlock the multiplier on mb or on the 2 MP1800 palomino 0.18
1,744 v by defaut

*11,5 by defaut
fsb 147 mhz ,i change it by bios ,can t go up,after pc is unstable.

thanks to help me =)

bye