Cant get Multi on epox 8KHA+ above 13

- OCinside.de PC Forum
https://www.ocinside.de

-- English
https://www.forum-inside.de/forums.cgi?forum=14

--- Cant get Multi on epox 8KHA+ above 13
https://www.forum-inside.de/topic.cgi?forum=14&topic=71

-- Veröffentlicht durch darkcrawler am 18:44 am 17. Sep. 2003

dont try it in 1mhz increments (e.g. 117), u have to set to 133, because of 1/4 divider instead of 1/3

-- Veröffentlicht durch cheddar am 1:32 am 17. Sep. 2003

even with a multi of 5x the computer won't post after a fsb of 116mhz, ok it's possible that there is an incorrect bios setting or something but i've tried everything.

Also this is ~ a 2yr old duron, got it when the morgan durons first came out. so it doesn't have any of the benefits of the better yields that todays durons would have.

-- Veröffentlicht durch darkcrawler am 0:47 am 16. Sep. 2003

-- Veröffentlicht durch cheddar am 11:24 am 15. Sep. 2003

That's not a problem i have a MSI KT3 mobo with pc2700 ram, This combination can hit a fsb of 166mhz, so the cpu is the limit

-- Veröffentlicht durch Beomaster am 18:07 am 14. Sep. 2003

My Duron runs with FSB 122, more wasn't able because the Board won't give more with PCI 1/3. A Duron must run with 133, because I'm running my K6 with 133MHz, too and thats the Prozessor generation before the Athlon. Maybe the mainboard limit the FSB.

-- Veröffentlicht durch cheddar am 11:39 am 14. Sep. 2003

The reason why you keep the duron at 100fsb is because the durons don't get much futher

Mine only goes up to a fsb of 116mhz then doesn't boot, so the multiplier is the only option for overclocking.

I currently have the same problem as i can so far reach 12.5*116 = 1450mhz on my duron 1ghz, to get any futher i see i'll have to cut the L10 bridge.

Since the duron has a ceramic package unlike the athlons organic one, how can i cut this bridge safely?

thanks

-- Veröffentlicht durch darkcrawler am 8:09 am 9. Sep. 2003

i dont understand why do u want your duron to run at fsb 100:noidea:

first lower the multi to 8 and increase the fsb to 133;)

more performance instead of increasing the cpu-clock only:top:

-- Veröffentlicht durch tracer001 am 17:11 am 22. Aug. 2003

Tnx for the info, i'll try it 1st thing 2morow, Thanks!:ocinside:

-- Veröffentlicht durch ocinside am 6:10 am 22. Aug. 2003

Yes, indeed, if your Duron has only four L3 bridges, you need to use this XP guide and also change the L4 and L10 bridges to change the multi to another fixed multi.

Or set the Pin-Mod guide to "AMD Athlon XP" (then unlock the multiplier first by connecting the five L1 bridges).

-- Veröffentlicht durch tracer001 am 5:38 am 22. Aug. 2003

But my Duron only has 4 L3 Bridges, i tried cutting it using a cutter but it wnt budge ,.. if i have only 4 L3 Bridge do i still need to mod the L4 and L10?

-- Veröffentlicht durch ocinside am 19:40 am 21. Aug. 2003

Your Duron Morgan should have five L3 bridges, so it's only necessary to modify this CPU with the interactive T-Bred guide or with the interactive Pin-Mod guide.
There's no need to modify the L4 or L10 bridges ;)
And of course it's possible to cut toooooooo deep, so don't cut deeper than necessary (about a half mm).

-- Veröffentlicht durch tracer001 am 18:10 am 21. Aug. 2003

;) Thanks!, I should MOD my L3 to get X13 but should i also change the L4 and L10? or L3 is enough? also is it possible for me to cut tooooooo deep in the CPU to kill it? Thanks in advance! :ocinside:

-- Veröffentlicht durch ocinside am 11:08 am 16. Aug. 2003

Yes, this is no problem at all ;)
But it's not possible by your BIOS.
Just use the interactive Pin-Mod guide or painting guide and you're able to get any multiplier above 12,5x :top:

-- Veröffentlicht durch tracer001 am 18:24 am 14. Aug. 2003

Ive unlock my Duron 1Gig Morgan Core running @ 1250Mhz with 100X13 why is dis? when  step up to13 and above it gets back to 100X10. Can I modify my CPU to accept 13 as default Multi? if so can any1 help me out Tnxz