is this where the topic goes? if so please help w/ pin wire

- OCinside.de PC Forum
https://www.ocinside.de

-- English
https://www.forum-inside.de/forums.cgi?forum=14

--- is this where the topic goes? if so please help w/ pin wire
https://www.forum-inside.de/topic.cgi?forum=14&topic=61

-- Veröffentlicht durch baadroker am 20:50 am 16. Juli 2003

why don't you stop doing stupid and get some 1 second glue a sharp pencil and a sharp object, look in the workshop painting xp guide look what bridges to connect and wich to cut put gleu in the bridges cut by amd and the ones cut by you use the pecil to connect the bridges don't worry if you fail (i did too) just make sure you haven got any gleu left on the contacts

-- Veröffentlicht durch dankis am 21:17 am 18. Juni 2003

you could use one long wire and wrap it around the 3 pins in a row or the pyramid? :O

so i take it its ok if the wires are not physically touching each other for a 3 in a row or pyramid?
and its ok if the cpu pin is not in direct physical contact with the wire in the socket?
so really, you could just cut a bunch of small pieces of wire and put 1 small piece in each socket and it works ok?
its confusing with the tool because it shows them connected in a line :o

-- Veröffentlicht durch Svenauskr am 20:02 am 16. Juni 2003

What would happen if you were connecting the pins of the cpu instead of sticking some cables into the holes of the socket?? ;)

-- Veröffentlicht durch dankis am 4:09 am 16. Juni 2003

is it ok if the two tails going into the middle hole are not touching each other? also, here is where im wondering, does the pin need to be touching the wire inside the socket or no?

-- Veröffentlicht durch Svenauskr am 0:24 am 16. Juni 2003

For three holes in a row just take two U's. Normally you can't break anything so just try.

-- Veröffentlicht durch dankis am 21:47 am 15. Juni 2003

hi ! thanks so much for coming to my aid...

when i'm doing the pin/wire mod with the socket view, i understand u make a ' U ' with the wire when there are 2 holes in a row, but when there is three holes in a row or when there is like a pyramid shape with three in a row and one on top... then how do you do it? do you make like a ' W ' with the wires ? or just make many ' U ' wires and have alot of ' U ' tails into the middle hole ?

i hope my english is not too confusing , thank you so much so so so much for the help  ^_^

- Danny