Asus A7M266 Vcore mod

- OCinside.de PC Forum
https://www.ocinside.de

-- English
https://www.forum-inside.de/forums.cgi?forum=14

--- Asus A7M266 Vcore mod
https://www.forum-inside.de/topic.cgi?forum=14&topic=25

-- Veröffentlicht durch NWD am 20:17 am 29. Sep. 2002

woohoo its very hot..

but only 300 Mhz with 2,05 VCore ? ohoh

-- Veröffentlicht durch KS am 20:14 am 29. Sep. 2002

I overclock Duron 950 to 1.24 GHz (9.5x133) using 2.05V vcore. CPU Temp 61C (load), MB temp 34C

-- Veröffentlicht durch NWD am 13:48 am 29. Sep. 2002

sure .. ..

-- Veröffentlicht durch KS am 9:23 am 29. Sep. 2002

I successfully mod Asus A7M266 vcore up by +0.25V by soldering a 8K Ohm resister from FB (Pin 7) to GND (Pin 9) of ADP3160 chip.

Would OC-inside be interested to post this on the web?

-- Veröffentlicht durch NWD am 14:57 am 25. Sep. 2002

i think it is the same mod as the a7a / a7v - 266 ..

with an 50kOhm resistor u got +0,2

more is impossible because of the overvoltage - saving by the bios ..

but ask jens ( ocinside ) in an PM .. think he knows what to do

-- Veröffentlicht durch KS am 23:10 am 24. Sep. 2002

Could you pls help me with the vcore mod of Asus A7M266?
The m/b uses ADP3160 and 2 units ADP3412 as the voltage regulator and driver respectively. I notice in the workshop that to mod the vcore is to connect a resistor from FB to GND. Is that all I have to do with A7M266? and How many Ohm do I have to use for this one to increase about +0.2V?
Thank you