Firmware for USB Ultra Infrared receiver v2.0

Firmware for USB Ultra Infrared receiver v2.0

- OCinside.de PC Forum
https://www.ocinside.de

-- English
https://www.forum-inside.de/forums.cgi?forum=14

--- Firmware for USB Ultra Infrared receiver v2.0
https://www.forum-inside.de/topic.cgi?forum=14&topic=207

Ein Ausdruck des Beitrags mit 4 Antworten ergibt bei 3 Antworten pro Seite ca. 2 DIN A4 Seiten. Das entspricht bei 80 g/m² ca. 9.98 Gramm Papier.

-- Veröffentlicht durch bjw908 am 0:57 am 7. Feb. 2012

The firmware for newer Atmel Tiny ICs with the more difficult fusebit programming isn't published, yet.

When will it be published? This "new" project looks to be at least a couple of years old by the copyright on the bottom of the page. There are also many sites that show how to build a programmer for these ATtiny ICs. It is a great looking project, just wish the firmware code was available for the chips.

-- Veröffentlicht durch bjw908 am 20:39 am 6. Feb. 2012

Zitat von ocinside um 20:23 am Feb. 6, 2012
Please take a look into the USB guide with the download for the previous AT90S2323 IC without necessary fusebit changing.
The firmware for newer Atmel Tiny ICs with the more difficult fusebit programming isn't published, yet.
But it's not necessary to buy the kit.
If you've all other parts, you can get the IC without the full kit.

If you don't want to publish the firmware for everyone, that is fine. I understand that not everyone can program these chips. The chips that you used for he previous project are now obsolete and no longer available. Could you please send me a PM with the firmware for the new ICs. I am an EET major in college so I have the ability to program the chips myself. I also don't believe that I should be forced to buy your pre-programmed chips at 6 euros each plus shipping to the US. That is really high considering I can get the ic's for less than $2 each.

(Geändert von bjw908 um 22:22 am Feb. 6, 2012)

-- Veröffentlicht durch ocinside am 20:23 am 6. Feb. 2012

Please take a look into the USB guide with the download for the previous AT90S2323 IC without necessary fusebit changing.
The firmware for newer Atmel Tiny ICs with the more difficult fusebit programming isn't published, yet.
But it's not necessary to buy the kit.
If you've all other parts, you can get the IC without the full kit.

-- Veröffentlicht durch bjw908 am 19:59 am 6. Feb. 2012

Hello,

Where is the firmware to program the chips? I have access to a programmer and chips so I don't need to purchase them from the "fanshop". I see that you have other info posted, but no firmware for programming the chips. Please post or send to me via PM. I'm sure there are others that would like the firmware also.

Thanks.