weirdest pb ever pls help - OCinside.de PC Forum

weirdest pb ever pls help

- OCinside.de PC Forum
https://www.ocinside.de

-- English
https://www.forum-inside.de/forums.cgi?forum=14

--- weirdest pb ever pls help
https://www.forum-inside.de/topic.cgi?forum=14&topic=19

Ein Ausdruck des Beitrags mit 3 Antworten ergibt bei 3 Antworten pro Seite ca. 1 DIN A4 Seiten. Das entspricht bei 80 g/m² ca. 4.99 Gramm Papier.

-- Veröffentlicht durch bAumbarT am 20:34 am 1. Sep. 2002

Zitat von Cyborg am 2:01 am Juli 16, 2002
Hope my English isn't too bad ;-)
Hmm it isn't easy to explain, but I think it could be the controller for the voltages (no idea how the name is in English). On almost every ABIT-Board it is the HIPxxxx phase modulator (gd I must be learning a little bit more english next time ;-)), maybe on your Board this sensitively thing don't work correctly. But I think that You can't repair this on your own.

CYA Cyborg

Are you sure that it`s not some kind of Overclocking Protection enabled in Bios or enabled by a Jumper Setting,first i would contact Abit and ask them whats there oppinion about your problem,it would be a pitty if you send it to abit and the only problem was an option that could been enabled mutch easier than by sending it to abit :),the preposter missed this option so first try to solve the problem by contacting abit,i obviously dont think that there is a problem with your mainboard!

(Geändert von bAumbarT um 20:35 am Sep. 1, 2002)

-- Veröffentlicht durch Cyborg am 2:01 am 16. Juli 2002

Hope my English isn't too bad ;-)
Hmm it isn't easy to explain, but I think it could be the controller for the voltages (no idea how the name is in English). On almost every ABIT-Board it is the HIPxxxx phase modulator (gd I must be learning a little bit more english next time ;-)), maybe on your Board this sensitively thing don't work correctly. But I think that You can't repair this on your own.

CYA Cyborg

-- Veröffentlicht durch vcosmin am 12:06 am 5. Mai 2002

I posted everywhere, here is my pb.
On an Abit Kg7, latest bios, Amd XP 1600+, Kingmax CL2 DDR 133
Every time i modify the vcore or/and vmem it comes back to default.
Let me explain. I raise the vcore or/and vmem for ex. reboot, going in bios, an monitor the vcore, and after 10 min for. ex it comes back to default !!!!!!!!!!!!!!!, no pb. I thing it was the PSU, but exactly same stuff it is happening if i lower the vcore and/or vmem, Anywai changed 3 PSU by now, posted everywhere no answer. Pls help.