weirdest problem eveeeeeeeeer pls help

- OCinside.de PC Forum
https://www.ocinside.de

-- AMD Overclocking
https://www.forum-inside.de/forums.cgi?forum=1

--- weirdest problem eveeeeeeeeer pls help
https://www.forum-inside.de/topic.cgi?forum=1&topic=1977

-- Veröffentlicht durch vcosmin am 7:43 am 9. Mai 2002

thanks for your reply, i boght a new abit kr7A-133 and it works really good, no pb at all.

-- Veröffentlicht durch SvenD73 am 9:07 am 7. Mai 2002

Hi,

kick this mainboard off. Sell it at ebay ab buy a new one. Or try call Abit by phone, if you got a Hotline-No.

I also never heard of this problem, so I think only Abit can help you.
I would buy a new MB.

bye

-- Veröffentlicht durch vcosmin am 8:51 am 7. Mai 2002

yes i send an email to abit, abou 2 months ago but no answer, aniway stranger pb. Is there a way to veriy to board at a hardware level, an might be the voltage regulator damaged???

-- Veröffentlicht durch BratzBirne am 6:25 am 7. Mai 2002

Hi

I think NWD is right... There must be a bigger Error in your BIOS-
Module or it's also possible/probably that your Motherboard has a fault...

Maybe your problems has other backround(s) and the existing errors are not all errors... ??!!

These are not the "normal" problems based on overclocking... The one (and only) solution i could give to u  -> take a BIOS (from somebody u know he/she has the same board) and change it with yours... But i fear this don't improve your situation, because the tests for flashing the BIOS were successfull...

Do u have written a email to ABIT and asked them if they know this problems?

CU Birne

-- Veröffentlicht durch NWD am 19:26 am 5. Mai 2002

try another BIOS-Module .. .. ..

-- Veröffentlicht durch vcosmin am 19:20 am 5. Mai 2002

ofcourse i have saved the setting on exit, an flash withh all possible version of bios. But look here, i raise or lower vcore, save&exit, back in bios, i am going to pc health (monitoring temperature&voltages), it is ok
for ex 1.85 i am staing  in bios !!!! for about 10 min and after that bang back to default it is driving me nuts, i cannot overclock more than 1533 with the default vcore, an it really piss me of.

-- Veröffentlicht durch NWD am 17:18 am 5. Mai 2002

maybe your BIOS-Module is defect ! Normally it should save the settings so try another one or try to flash it

p.s. You have saved the settings @ exit ? :wink:

-- Veröffentlicht durch sebatsian71475476 am 15:35 am 5. Mai 2002

:confused:

-- Veröffentlicht durch vcosmin am 12:52 am 5. Mai 2002

i have changed the mb batery, but the same, and anyway the bios kept hist setting except vcore and vmem

-- Veröffentlicht durch sebatsian71475476 am 12:27 am 5. Mai 2002

you must change the motherboard batterie ( was heist das auf englisch??)

-- Veröffentlicht durch vcosmin am 11:50 am 5. Mai 2002

I posted everywhere, here is my pb.
On an Abit Kg7, latest bios, Amd XP 1600+, Kingmax CL2 DDR 133
Every time i modify the vcore or/and vmem it comes back to default.
Let me explain. I raise the vcore or/and vmem for ex. reboot, going in bios, an monitor the vcore, and after 10 min for. ex it comes back to default !!!!!!!!!!!!!!!, no pb. I thing it was the PSU, but exactly same stuff it is happening if i lower the vcore and/or vmem, Anywai changed 3 PSU by now, posted everywhere no answer. Pls help.