OCinside.de PC Forum > Antworten in PCI IDE controller Karte mit Silicom Chip BIOS update, wie ?

Beitragsrückblick für (die neuesten Beiträge zuerst)
hathor	Erstellt: 17:01 am 19. Dez. 2006
	DIE WIRD DOCH MITGELIEFERT !!! Procedures to run UpdFlash.exe •For DOS system •Change to directory where the UpdFlash.exe and BIOS binary file are located •Run UpdFlash to load flash memory with BIOS binary code •For other OS (such as Windows 9x/Me/NT4/2K/XP or Linux/Unix) but with x86 system •Download the latest copy of the FreeDOS kernel from internet, it is in: http://prdownloads.sourceforge.net/freedos/ke2026a16.zip •Unpack the archive, change directories to where you unzipped it, insert a formatted diskette in a: drive, and then run the install batch file from there. That should make a bootable floppy drive in “a:” •Copy the UpdFlash.exe program file and BIOS binary file to “a:” •Boot from the floppy, run UpdFlash to load flash memory with BIOS binary code Notes:For Win9x/ME system, you can use startup disk to boot to DOS mode and run the UpdFlash utility reliably there. So they might be able to save the effort of creating this bootable FreeDOS disk. The UpdFlash.exe command line syntax is as follows: updflash input_file_name –a –d –v –IDxxxxx where input_file_name is the input binary file name –IDxxxxx is optional parameter to specify SI controller type (ex. -ID680, -ID3112, -ID3512, -ID3114, -ID3124) If this parameter is not specified, the utility will search for all installed SI controller chips and if more than 1 type of SI controller are installed in the system, the program will prompt the user to select controller type -a is optional parameter to set auto mode. In auto mode, no user response is required. -d is optional parameter to set debug flag -v is optional parameter to display current BIOS version number in the flash memory chip The following lists return codes that UpdFlash.exe will return when the program exits. •0 – Update BIOS successed •1 – Update BIOS failed •2 – BIOS is already up to date •3 – No Silicon Image controller is found •4 – Can not open input file •5 – Flash memory chip is not supported •6 – Input file is for mother board BIOS UpdFlash can also be run in menu mode to test the flash memory chips. To run the utility in menu mode, no parameter is needed.
kober	Erstellt: 12:00 am 19. Dez. 2006
	aber wie, ist leider kein windows tool Kannst du mir ne Beschreibung geben ??
hathor	Erstellt: 11:02 am 19. Dez. 2006
	Du musst die BIOS Update Utilities downloaden und nutzen: http://www.siliconimage.com/support/supportsearchresults.aspx?pid=31&cid=15&ctid=2&osid=0&
kober	Erstellt: 10:12 am 19. Dez. 2006
	Hi, würde gerne das BIOS der PCI IDE karte updaten. Weiß leider nicht wie, hab mir von Silicon das BIOS besorgt, dort steht soll den flasher benutzen, leider hab ich ihn nihct als Progi im Windows wie beschrieben. hat schon jemand dies getan ?? Danke (Geändert von kober um 10:13 am Dez. 19, 2006)