» Welcome Gast   | Register

PC Forum
English
Answer in: My current System

Answer to My current System - how to overclock my sytem and get it stable
Username:   Not registered yet?
Password:   Forgot password?
iB Code Einmal klicken um den Tag zu öffnen, nochmal klicken zum Close

Top Smilies
Beitrag

HTML ist on für dieses Forum

IkonCode ist on für dieses Forum

SMILIES LEGENDE ansehen
Beitragsoptionen

 Would you like to add your signature?
Do you want to be informed about answer by email?
Do you want to activate emoticons in your post?
 

Review of postings for My current System (the latest posts first)
cheech2711 Erstellt: 13:55 am 10. Sep. 2003
@Major Tom
1frst =yes it does I am able to change the Muliti as much as I like also the Vcore dimms agp
2 yes with the latest Bios it does support FSB200
3 thats the thing I will find out later tonigt when I downloaded the Tool from AMD Site Palo or not:blubb:
4 No Iam not then it is only 333Infineon in Dual Mode goes to 171Mhz and then :noidea:
5 PSU???? anyway cooling in the mom arctic cooling copper silent steady by 52C
6 and yes I am a starter but I realy like it :thumb:
Its a lot of fun if it works
I have made this thread up now on the german board and besides I got my Pc running now with 1.750Vcore@9x200FSB@1804MHZ and 5.2.2.2,5 and its running stable at 52c
darkcrawler Erstellt: 14:13 am 9. Sep. 2003
the 8nax is the same as the 8rda
MajorTom Erstellt: 11:26 am 9. Sep. 2003
As far as I know, your Board isn't very popular here! Does it deliver the usual NForce2 options? fixed AGP/PCI clock.... wide range of Multipliers... CoreVoltage .......

Does it officially support FSB200? (or, in other words: Is it the new NForce2 "Ultra" Chipset that supports Busspeeds of 200(+)?)

What type of XP2000+ are u using? ( maxing out at 1700 somehow sounds like a bad Palominostepping, did you assemble the rig yourself?)

Are you absolutely positive that your Ram works at speeds of 200 (x2)?

Some Information 'bout cooling and the PSU you use might turn out to be helpfull as well!

and, last but not least: Are you familiar with the the general techniques of OverClocking? (or is this your first attempt to get the maximum out of your CPU?)

(Geändert von MajorTom um 11:28 am Sep. 9, 2003)
Svenauskr Erstellt: 10:34 am 9. Sep. 2003
I'm awfully sorry Beo. I promise this won't happen again. :lol:
Beomaster Erstellt: 10:25 am 9. Sep. 2003
Boahr, Sven, I've just written an answer and it wasn't able to send it, don't try this again, but now back to overclocking.
That you reach only 1700MHz with 200MHz FSB could be because your Mainboard won't go higher. So try now with high multi and low FSB how high you will come. And maybe if the temperature is below 55°C you can raise the voltages a litle bit to get higher.
Weniger Answer Mehr Answer
Svenauskr Erstellt: 10:14 am 9. Sep. 2003
I'll move this to the english speaking section if you don't mind.

Btw. have you tried to increase the vcore a little bit?
darkcrawler Erstellt: 9:56 am 9. Sep. 2003
hu, thats not the right forum, better try it in the english instead of german.

maybe ur cpu has the palomino or tbred a core, which often wont go over 1.7 -1.8 gig, so look at the stepping and ull find out if palo or tbred a / b
cheech2711 Erstellt: 9:16 am 9. Sep. 2003
Is there anyone out there who can help me out with overclocking my athlonXP2000???:blubb:
My System: Enmic 8NAX(Nforce2) 333Mhz Ram in Dualchannelmode AthlonXP 2000 WD80GB and I am running winxp prof.:godlike:
So my prob is that I am only able to raise my cpu to 1750Mhz and thats it I tried it on 200FSB but there I have even less only 1700Mhz.
If I go higher then the screen stays black or windows won´t start :noidea:
So if there is anyone out there to help me :godlike::godlike::godlike:
×