» Welcome Gast   | Register

PC Forum
English
Answer in: Thnx! :)

Answer to Thnx! :) - but here's a new problem :)
Username:   Not registered yet?
Password:   Forgot password?
iB Code Einmal klicken um den Tag zu öffnen, nochmal klicken zum Close

Top Smilies
Beitrag

HTML ist on für dieses Forum

IkonCode ist on für dieses Forum

SMILIES LEGENDE ansehen
Beitragsoptionen

 Would you like to add your signature?
Do you want to be informed about answer by email?
Do you want to activate emoticons in your post?
 

Review of postings for Thnx! :) (the latest posts first)
Radu Erstellt: 15:08 am 17. März 2004
Trooper
How did youexactly unlock the morgan 1300 ?
I tried Pinmod for Plaomino and it was unsuccesful , Do I really have to connect and cut bridges ? Is there a pin mod becaouse I preffer to use a pin mod rather than connecting bridges.

Any hint please ?

Bliemsr Erstellt: 12:09 am 11. Dez. 2003
:lol:  Dude, if SoF-2 works.... why the heck bother about some dorky
benchmark programs?

I mean, do you REALLLY need Prime 95? If my PC was running
stable with Sof-2, I wouldn't care about other programs.
I guess that if your computer runs stable with SOF-2, it will be able to
handle all other applications without a glitch.
NWD Erstellt: 21:19 am 8. April 2003
hehe i said..

the kt333 & kt400 chipset based boards are somtimes a little bit strange ..

like mine, i cant run at more than 175mhz even with +0,3V and slowest settings ( pc-333 cl2,5 infineon )

but it works so who cares.. :wink:
Trooper Erstellt: 16:31 am 8. April 2003
actually it looks like the new bios did improve some stuff after all. i managed to boot up in 166*7 but then i was getting lots of bsods with 'page fault in nonpaged area' messages. that looked to me like ram problem so i added 0.3v to ram and now i've been running at 8.5*166 all night and i had no problems, i played sof2 for over an hour and it was fine but prime95 still crashes after 20 or so minutes. looks like it was rams fault all along. now im considering if i should buy some better ram (infineon, kingston, etc...)?
Trooper Erstellt: 18:33 am 7. April 2003
today they released a new bios so i flashed the mobo but still the same shit... atm im writing this at 6*166, but that means the cpu is underclocked... bloody hell...
Weniger Answer Mehr Answer
NWD Erstellt: 16:17 am 7. April 2003
thats damn strange ..

i have no idea..

u have the newest bios ?
Trooper Erstellt: 16:08 am 7. April 2003
but ram was always working at 166mhz, even when the cpu was locked the board was running in async mode (100/166)? ram is pretty cheap stuff from samsung, you think i should try something better? as for access time ill have to look that up...


(Geändert von Trooper um 17:18 am April 7, 2003)
NWD Erstellt: 18:48 am 6. April 2003
mmh the KT400 is definitely able to run at 166mhz but maybe there are worng settings with the ram

set it to the slowest settings you can .. then try again..

or check out for a newer BIOS..

and what is it for a RAM ? infineon ect. and maybe tell me the access time ( ns, it should be at least 6 nanoseconds )

my last DDR-333 was only 7,5 ns so it was impossible to run at 166
Trooper Erstellt: 17:46 am 5. April 2003
atm it's working at 10*140 stable, ram timings were at spd and ram should've worked unless there is something im missing here.
NWD Erstellt: 13:27 am 5. April 2003
strange i got my Duron 1G @ 1,35 G with a 175 FSB on a MSI KT3 Ultra rev1 and with 512MB Infineon

and 6 x 166 is only 1G so it should work..

but 6x 100 and 6x133 works, eh?

tell me your RAM - Timings please, maybe they are wrong..
×