» Welcome Gast   | Register

PC Forum
English
Answer in: Rare problem when booting

Answer to Rare problem when booting
Username:   Not registered yet?
Password:   Forgot password?
iB Code Einmal klicken um den Tag zu öffnen, nochmal klicken zum Close

Top Smilies
Beitrag

HTML ist on für dieses Forum

IkonCode ist on für dieses Forum

SMILIES LEGENDE ansehen
Beitragsoptionen

 Would you like to add your signature?
Do you want to be informed about answer by email?
Do you want to activate emoticons in your post?
 

Review of postings for Rare problem when booting (the latest posts first)
theobub Erstellt: 5:33 am 24. Feb. 2005
It just came to my mind.... maybe try a higher Vcore or some chipset voltage.

But post your system info it will help.
theobub Erstellt: 5:23 am 24. Feb. 2005
Could you inform us the voltage readings, temps, and the psu you are using?

It would help on building a more reliable diagnosis.:thumb:
theobub Erstellt: 5:21 am 24. Feb. 2005
Could you give us your temps, voltage readings, and also what kind of psu you're using?

That would help to give you a more reliable diagnosis.
Skyfox Erstellt: 4:33 am 13. Feb. 2005
Hi, I suppose the Problem could be the following but I don't know your HW that good so it's only a suggestion.

When turning on your PC the Powersupply starts up and it takes a while until all Volltages and currents are up & stable. The PSU indicates that state with a +5V Signal within approx. 0.5 seconds.
I don't know at which point your BIOS inits the onboard timer.
So I suggest, that the BIOSs Time-Out for this signal is already due by the Time the PSU sets it.
Tassadar Erstellt: 2:25 am 30. Jan. 2005
I have an strange problen with the computer I've build:

MSI Neo 2 platinum
Winchester 3500+
4x Dimm 512 Corsair XMS

2xWD 200 Gb raid 0


At last I've let it primeStable at 266 mhz bus, and memory at 221 Mhz cas 2-2-2 with voltage 2,85v, multiplier 9,5 (2526 mhz at 1,55v effective)

The problem is that the computer is completely stable, works perfectly, but... One time boot perfectly, then shut down, turn on again, and doesn't post, press power button 3 secs and power off, and by third, press button and post, but at only 200 bus mhz (a kind of secure mode I suppose). By last, shut down and put on again, then booting perfectly at 266 bus, but when shut down, next time again doesn't post, and the sequence repeat:

-Boot OK (266 bus)
-No post
-post, but at 200 bus
-Boot OK (266 bus)
-No post
...
...

Anyone knows why is this happening? I'm desesperate :'(
×