OCinside.de PC Forum > Antworten in p2

Review of postings for p2 (the latest posts first)
poekie	Erstellt: 20:58 am 9. Jan. 2005
	Thats treu, the board is able to change some usefull settings, only the p2 processor is locked. I found on oc inside an article about the p2, about putting a circuit between RESET#, IGNNE#, A20M#, LINT0 and LINT1 ... Now, i aint a newbe in overclocking, but this seems quite hard. What i need is some pictures, some explenation, a guide or something. Its worth trying to oc the p2, much more intresting then all those athlons, thats easy..
NWD	Erstellt: 11:38 am 8. Jan. 2005
	No jumpers for setting the FSB? I bet there is because the board supports P3s with a 100mhz FSB.
poekie	Erstellt: 20:40 am 6. Jan. 2005
	only way to upper the fbs is to change it in the bios. But my bios isnt capable of changing it, it doesnt have the function
Philipp Stottmeister	Erstellt: 20:35 am 6. Jan. 2005
	Some Pentium2 are locked. Thats why you cant change the multiplicator. The only way to overclock the precessor is to set the FSB up. I think the Pentium 2 is running on 66MHz FSB. YOu can sat it e.g. to 75MHz.
poekie	Erstellt: 22:11 am 5. Jan. 2005
	My baby: A good old intel pentium 2 with a slot 1 proc. My mobo a siemens D 1115 with some jumpers to select processors up to a pentium3. My problem is that i cant get this processor overclocked. I cant select multipliers in the bios, neither pinmod the poor proc. I cant change the multiplier in small steps using CpuFbs, cause it doesnt recognise my pll, and i dont know if i can voltmod this baby..or how. Any1 got a suggestion how to put out some extra of this pentium 2? Greats poekie